Overview
The Rancho RS999329 is a front RS9000XL Series shock absorber built for 2007–2018 Jeep Wrangler (JK) vehicles with a 2.5 to 3 inch front lift. It fits both two-door and four-door Wrangler models and is designed for a controllable ride on pavement and on rough trails.
The damper has an 18mm piston rod and a nitrogen gas charge. Its 9-position tuner works manually or with a remote, so the front end can be set softer for daily driving or firmer on demanding trails.
Key features
- 18mm diameter piston rod
- 9-position manual or remote tuning
- Nitrogen gas charged body
- Front position for a 2.5-3 inch lift
- Protective boot included
- Fits the 2007–2018 Jeep Wrangler JK as a direct fit
Front lift range and damper choice
A front damper should be matched to the lift height of the vehicle, since the shock angle changes as the suspension is raised. When a Wrangler has a moderate lift, the shock travels differently than on a stock vehicle, and a setting that feels right on pavement may need a small change on the trail. Measuring the lift before ordering helps avoid surprises.
Adjustable dampers work best when the rest of the suspension is sound. Worn bushings, sagging springs and loose mounts can make any shock feel unpredictable. Inspect the front end when the new damper goes in, and keep notes on the setting so future adjustments are easy to repeat.
- Measure front lift before ordering
- Inspect bushings and mounts
- Note the tuner setting after each change
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS999329 |
| Shock series | RS9000XL Series |
| Position | Front |
| Lift height | 2.5-3 inch (feature list); 3 in. (lift field) |
| Piston rod diameter | 18mm |
| Tuning | 9-position manual or remote |
| Charge | Nitrogen gas charged |
| Fitment type | Direct fit |
| Included | Protective boot |
Vehicle fitment
Fitment covers the 2007–2018 Jeep Wrangler (JK), from the 70th Anniversary through Sport S and X trims, plus the Unlimited versions of those trims.
Earlier TJ and LJ models and the JL generation fall outside this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm that the front lift on your Wrangler falls in the 2.5 to 3 inch range this part is labeled for. The lift field reads 3 in., so compare that figure with your own lift height.
What’s included
A front RS9000XL shock absorber with protective boot included.














