Overview
The Skyjacker M95 Performance Monotube Shock Absorber, part number M9518, is a rear gas-charged monotube shock for 1 to 3 in of lift. It fits the 1984 to 2001 Jeep Cherokee XJ, 1997 to 2005 Jeep Wrangler TJ and 2004 to 2005 Jeep Wrangler LJ Unlimited models, including the Unlimited Rubicon.
The monotube design places a floating piston between the oil and the high pressure nitrogen gas inside one tube. The single tube design helps operating temperatures stay cooler under extreme conditions. This rear unit shares the M95 Performance body, bore and mounting design of the front M9516 and M9517 shocks, but its lift range and fitment differ, so check both before choosing it.
Key features
- Monotube body that Skyjacker says runs cooler under extreme conditions
- High pressure nitrogen gas charge with a floating piston
- Large 46mm bore
- Internal bump stop
- 180 degree directional mounting
- Lift range of 1 to 3 in
- Shock boot included
Rear shock swap tips
A rear monotube shock does most of its work under the axle, controlling how the springs rebound after a bump. The gas charge keeps the oil under pressure, so the shock responds consistently on washboard roads and during quick direction changes. When the shock is removed, the mounts, bushings and bump stops are the other parts that affect how the rear end feels afterward.
Start by confirming the eye orientation on the old shock, since a directional unit installed backward will not work as intended. Clean the mounting surfaces and check the bolts for corrosion before fitting the new shock. Use fresh bushings if the old ones are cracked, and tighten the hardware once the axle is at its normal height so the shock is not preloaded.
- Confirm eye orientation against the old shock
- Clean mounting surfaces before fitting the new unit
- Replace cracked bushings during the swap
- Recheck mount bolts after the first few drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | M9518 |
| UPC | 803696211411 |
| Shock series | M95 Performance |
| Position | Rear |
| Construction | Gas monotube |
| Charge | Gas charged, high pressure nitrogen |
| Bore | 46mm |
| Mounting | 180 degree directional |
| Bump stop | Internal |
| Lift height | 1 to 3 in |
| Included | Shock boot |
| Sold as | Each |
Vehicle fitment
It fits the 1984 to 2001 Jeep Cherokee (XJ) with Base, Laredo, Limited, Sport and other trims, the 1997 to 2005 Jeep Wrangler (TJ) with Rubicon, SE, Sahara, Sport and X trims, and the 2004 to 2005 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon. Grand Cherokee ZJ and WJ, Wrangler JK and two-door Wrangler LJ models are outside its coverage.
The list does not include the Grand Cherokee ZJ or WJ, the Wrangler JK, or two-door Wrangler LJ models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the M9518 is directional with 180 degree mounting, confirm the eye orientation against the original rear shock before installing it. Check that your suspension gives the 1 to 3 in lift range shown in the specifications.
What’s included
One rear shock absorber with a shock boot, sold as each.









