Overview
The Fox 2.0 Performance Series Smooth Body IFP shock, part number 985-24-085, is a rear aluminum shock with a 0 to 1.5 in. lift range. It fits the 1984–2001 Jeep Cherokee (XJ), 1997–2006 Jeep Wrangler (TJ) and 2004–2006 Jeep Wrangler (LJ).
Fox designed the shock as a direct replacement that bolts into the place of the original unit on these vehicles. Its listed figures are 19.45 in extended, 12.85 in collapsed and 6.6 in of stroke. The IFP (internal floating piston) design is a standard way to keep the oil and gas charge apart inside the body.
Key features
- Rear mounting position
- Aluminum body
- Internal Floating Piston (IFP) design
- Gas-charged construction
- Direct replacement bolt-on fit
- 6.6 in stroke
- Listed lift range of 0 to 1.5 in.
Rear shock wear and replacement
A rear shock controls how the axle settles after a bump and how quickly the body returns to level. In an internal floating piston design, the oil and gas are kept apart by a moving piston, which helps the damper keep working when it is hot or worked hard. Over time the seals wear and the oil can leak, and the shock loses control.
Common signs of a worn rear shock include a bouncy ride after dips, oil residue along the body, clunks over ruts and uneven tire wear at the rear. Inspect the eye mounts and bushings during the same job, since worn hardware can cause a new shock to wear quickly.
Work with the old shock in a stable position, support the axle safely, and keep clear of the gas canister end when it is removed. Handle the old body with care, and do not cut or heat it.
- Check mounts and bushings during replacement
- Look for oil residue on the body
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 985-24-085 |
| UPC | 70000693576 |
| Product line | Fox 2.0 Performance Series Smooth Body IFP |
| Mounting position | Rear |
| Body | Aluminum |
| Extended length | 19.45 in |
| Collapsed length | 12.85 in |
| Stroke | 6.6 in |
| Lift range | 0 to 1.5 in. |
| Charge type | Gas charged |
| Fitment type | Direct fit |
Vehicle fitment
Listed vehicles: 1984–2001 Jeep Cherokee (XJ) in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims; 2004–2006 Jeep Wrangler (LJ) in the Unlimited and Unlimited Rubicon trims; and 1997–2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X trims.
Wrangler JK (2007 and later), Wrangler YJ, Grand Cherokee and Liberty models are not in this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Compare your current height with the 0 to 1.5 in. lift range before fitting, and check the mounts against the shock you are removing. Gas-charged units remain pressurized even when old, so never heat or pierce the body.
What’s included
One rear shock, quantity Each.
Not included: Plan to source any mounting hardware you need before installation.








