Overview
The Pro Comp ZX2092 is a front Pro Runner monotube shock for the 1984–2001 Jeep Cherokee (XJ) with 2 to 3 inches of lift.
The monotube is nitrogen gas pressurized, which helps eliminate cavitation during compression and rebound and lets the shock dissipate heat more efficiently. The body is 2 inches in diameter, with a brushed and zinc-plated finish and a clear coat.
Each shock is tuned for the vehicle it is sold for, using vehicle-specific ride tuning derived from dyno and real-world testing. The result is multi-stage valving meant to optimize ride and handling for each application.
Pro Runner control arms are not included with the shock. Front control arms are often replaced alongside front shocks on a lifted Cherokee. The package includes a 90-day ride guarantee and a true lifetime warranty that is 100% transferable.
Key features
- Gas-charged monotube design
- Nitrogen-pressurized body to limit cavitation
- Vehicle-specific ride tuning with multi-stage valving
- 2-inch diameter body with brushed zinc and clear coat finish
- Rubber bushing and black polyurethane boots included
- Front position for 2 to 3 inches of lift
Front shocks and control arms
On a front axle, the shock works with the control arms and springs to keep the wheel tracking and the steering steady. Worn arm bushings can make a new shock feel loose, so inspect the arms and their bushings when the shock is replaced. Check that the rubber bushing on the shock fits the mount without binding.
Front shock wear often shows as a wandering steering wheel, nose dive under braking, or a clunk over bumps. Look for oil on the body and a torn boot. When replacing one shock, consider replacing its counterpart so both sides damp the same way.
- Inspect control arm bushings at the same time
- Check the boot for tears
- Retighten mounts after the first drives
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | ZX2092 |
| UPC | 614901095067 |
| Shock series | Pro Runner |
| Position | Front |
| Shock type | Monotube |
| Charge | Nitrogen gas |
| Body diameter | 2 inches |
| Finish | Brushed zinc and clear coat |
| Lift range | 2 to 3 inches |
| Boot | Black polyurethane |
| Bushing | Rubber |
| Warranty | True lifetime, 100% transferable |
| Ride guarantee | 90 days |
Vehicle fitment
It is a direct fit for the 1984–2001 Jeep Cherokee (XJ). The Wrangler and Grand Cherokee are not covered.
The list does not include the Wrangler or Grand Cherokee. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
This is a front shock sized for 2 to 3 inches of lift, so check the lift height on your vehicle before ordering. The rubber bushing included with the shock should be checked against the mount.
What’s included
One front shock with a rubber bushing and a black polyurethane boot.
Not included: the Pro Runner control arms that Pro Comp recommends with it.


















