Overview
The Skyjacker M9388 is a rear M95 Performance Monotube shock absorber for a 2 to 4 inch lift on the 2019 Jeep Wrangler JL. It is charged with nitrogen gas, has an internal bump stop and is sold individually.
The M95 line is aimed at light trucks, Jeeps and SUVs. Skyjacker credits the single-tube design with helping the shock stay cooler on hard runs, and the floating piston inside works with the nitrogen charge to respond quickly to input.
Key features
- Rear position for the Wrangler JL
- Lift range of 2 to 4 inch
- Monotube body with nitrogen gas charge
- Internal bump stop
- Large 46mm bore
- 180 degree directional mounting
- The shock is designed to limit fade and lag under repeated use.
Rear shock basics
A rear shock controls how the rear axle moves over bumps and how the back of the Jeep settles under load. Because a rear unit carries a different share of weight than a front one, rear lift and load should be measured before choosing a shock for that position.
Rear shocks also interact with the springs, the bump stops and the rear bushings. A worn bump stop or a loose mount can change how the shock performs, so inspect them whenever a rear shock is replaced. Keep the mounts clean and check for play after rough trails.
- Measure rear lift and ride height
- Inspect bump stops and rear bushings
- Check mounting bolts after the first trail runs
- Replace rear shocks in pairs for balanced handling
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYM9388 |
| Shock series | M95 Performance |
| Position | Rear |
| Lift range | 2 to 4 inch |
| Shock type | Monotube |
| Charge | Nitrogen gas |
| Body bore | 46mm |
| Fitment type | Direct fit |
Vehicle fitment
The shock fits the 2019 Jeep Wrangler (JL), including Rubicon, Sport and Sport S two-door models and Unlimited Rubicon, Unlimited Sahara, Unlimited Sport and Unlimited Sport S four-door models.
The list covers only the 2019 JL, so the 2018 and 2020 and later JL years, the JK and the Gladiator are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the M9388 is rated for a 2 to 4 inch lift, check the rear lift height on your Jeep before ordering. Have the alignment checked after installation.
What’s included
The shock is sold individually. Look over the package contents before the install begins.
Not included: the second rear shock.









