Select your vehicle

Skyjacker Drag Link – SDL250

Skyjacker

$185.23In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 9:20 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Skyjacker SDL250 offset and adjustable front drag link
  • Fits 1977 to 1979 Ford F-250 and 1979 Ford F-350 pickups
  • Designed for the factory tie rod end
  • Part number SDL250, UPC 803696158341
  • Limited Lifetime Warranty

Description

Overview

The Skyjacker SDL250 is an offset, adjustable front drag link for the 1977 to 1979 Ford F-250 and the 1979 Ford F-350 pickups.

The offset design changes where the link sits relative to the steering arm, so its position matters during installation. It fits the factory tie rod end and allows maximum articulation, and it carries a Limited Lifetime Warranty.

Key features

  • Offset design
  • Adjustable length
  • Front position
  • Fits the factory tie rod end
  • Limited Lifetime Warranty

Setting length and toe

A drag link carries steering motion from the steering box to the front wheels, so small changes in its length alter toe. Adjust the link to the length needed for straight tracking before tightening the clamps, then recheck the front end on a level surface. Work slowly, because a link set too short or too long can bind at full steering lock.

Look for signs of wear at the ends: loose joints, torn boots, bent link tubes and collapsed bushings. Wandering, pulling to one side or a loose steering wheel can point to a worn drag link. Replace worn ends together with the link when the tie rod end shows play, so the front end stays matched.

  • Mark the original length before removing the link
  • Tighten clamp bolts only after toe is set
  • Inspect boots and grease fittings at each service

Specifications

Brand Skyjacker
Part number SDL250
UPC 803696158341
Part type Drag link
Position Front
Design Offset and adjustable
Fitment type Direct fit
Warranty Limited Lifetime Warranty

Vehicle fitment

The manufacturer list shows the 1977 to 1979 Ford F-250 in Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT and XLT trims, and the 1979 Ford F-350 in Custom, Ranger, Ranger Lariat and Ranger XLT trims.

F-350 years other than 1979 and F-250 years after 1979 are not on the manufacturer list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The link is offset and adjustable, so set its length before final tightening. Recheck front alignment after installation, since the link length affects toe setting.

What’s included

Check the package contents against your installation before starting.

SKU: SKYSDL250 Category:

Specification

Shipping weight 5.00 lbs
Package dimensions 24.00 × 6.50 × 6.50 in
brands

Fitment

VehicleYearsTrims
Ford F-2501977–1979Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT, XLT
Ford F-3501979Custom, Ranger, Ranger Lariat, Ranger XLT

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the SDL250 an offset drag link?

Yes. The SDL250 is an offset and adjustable drag link for the front position. Compare its shape with your existing drag link before ordering, so the offset sits where your steering arm expects it.

Does the SDL250 fit a Ford F-350?

Yes, for the 1979 Ford F-350 only, in Custom, Ranger, Ranger Lariat and Ranger XLT trims. Other F-350 years are not covered. Confirm fit for your year, model and trim before ordering.

Does the SDL250 fit the factory tie rod end?

Yes, the drag link is designed to fit the factory tie rod end. Confirm the link length and tie rod end condition against your existing parts before ordering.

How can I tell the drag link needs replacing?

Look for play at the ends, a bent tube, torn boots, or steering that wanders or pulls. If the tie rod end is also loose, service both together. A worn link makes alignment hard to hold and should be replaced rather than bent back.

Does an offset drag link change steering geometry?

Yes, the offset moves the link's mounting relation to the steering arm, which can change toe setting and clearance. Check clearance to the frame and tires at full lock after installation, and confirm alignment afterward.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon