Overview
The Rubicon Express RE2610 is a chromoly drag link for the Jeep JK Wrangler, 2007 to 2018, in two-door and four-door models. It converts the stock mounting location from under the knuckles to on top of the knuckles.
The over knuckle location improves steering handling and geometry on JK vehicles that run a track bar drop down bracket with their lift. Installation requires a tapered reamer and special tools, and alignment is needed afterward.
Key features
- Chromoly drag link
- Over knuckle conversion
- Improves steering handling and geometry angles
- Suited to JK vehicles with a track bar drop down bracket
- Requires special tools
Over knuckle setup
On a lifted JK, the drag link position affects how the steering works with the track bar and knuckles. Moving the mount to the top of the knuckle changes the arc the link follows as the wheels turn, which is why the conversion is paired with a track bar drop down bracket on lifted builds.
Drag links take a lot of force during trail use, so the condition of the knuckle mounting area matters. Clean and inspect the bores before reaming, and make sure the reamer is used square to avoid an uneven fit. A loose or misaligned link can clunk and wear the rod ends quickly.
Many owners who make this change also check the track bar, tie rod ends and steering stabilizer at the same time, since these parts work together. Alignment should follow any change to the drag link.
- Inspect knuckle bores for wear before reaming
- Check the track bar and tie rod ends at the same time
- Schedule alignment as soon as the install is complete
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE2610 |
| UPC | 614901440270 |
| Material | Chromoly |
| Mounting | Over knuckle |
| Body style | 2 and 4-door models |
| Fitment | Direct fit |
Vehicle fitment
It is a direct fit for JK Wranglers from 2007 to 2018, in 2 and 4-door models. It is intended for JK vehicles that run a lift with a track bar drop down bracket.
Confirm your vehicle’s year, model and trim before ordering, and check the track bar bracket on your build.
Installation notes
Special tools are needed for installation, and a tapered reamer is required. Alignment must be done after the drag link is installed.















