Overview
The TeraFlex HD Tie Rod and Drag Link Kit, part number 1853900, is a heavy duty steering kit for the 2007-2016 Jeep Wrangler (JK), including Unlimited models.
The kit is designed for the extreme conditions that bend and fail factory steering components. The HD tie rod uses a 1.6 inch O.D. heat treated 4140 Chromoly tube, and the HD drag link is fully forged. The forged tie rod end housing is designed for JK use and clears factory 17 inch wheels.
Key features
- Heavy duty tie rod and drag link kit for the Jeep Wrangler JK
- 1.6 inch O.D. heat treated 4140 Chromoly tie rod
- Designed to be stronger than the factory tie rod
- Joint uses a 4140 chrome moly ball/stud and 1045 carbon steel housing
- Adjustable preload tension; joint secured with a snap ring
- 14 degrees of total movement in the tie rod configuration
- Fully forged drag link with an oversized DOM factory style adjusting collar and pinch clamp
Choosing steering upgrades
A tie rod and drag link upgrade affects the parts that take the most load when the wheels turn over rough ground. Factory steering components can bend under repeated impacts, especially with larger tires or after frequent off-road use. Upgraded joints and heavier tube can help, but they work best as part of a balanced steering setup rather than as a single change.
Think about the other steering and suspension parts that wear alongside these pieces. Track bars, steering stabilizers and control arm bushings often need inspection at the same time, and a worn pitman or idler arm can make a new tie rod feel loose. After any change, have the alignment set and check that the steering stops and turning clearance are correct for your tires.
- Inspect the track bar and its mounts
- Check ball joint boots for tears
- Recheck the drag link pinch clamp after the first drives
- Have toe set after any linkage replacement
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | TER1853900 (1853900) |
| UPC | 843885033295 |
| Product type | HD tie rod and drag link kit |
| Tie rod | 1.6 inch O.D. 4140 heat treated Chromoly |
| Joint ball/stud | 4140 chrome moly |
| Joint housing | 1045 carbon steel |
| Joint movement | 14 degrees total (tie rod configuration) |
| Drag link | Fully forged; oversized DOM adjusting collar and pinch clamp |
| Wheel clearance | Allows clearance for factory 17 inch wheels |
| Fitment type | Direct fit |
Vehicle fitment
The manufacturer fitment list for the 1853900 covers: 2007–2016 Jeep Wrangler (JK) (70th Anniversary, Rubicon, Sahara, Sport, Sport S, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X, X).
The kit fits 2007-2016 Wrangler (JK), including Unlimited models. It does not cover the 2017-2018 JK, the TJ or the JL. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Suspension, steering and brake parts are safety-critical, so professional installation is recommended. Support the vehicle on rated jack stands, never on a jack alone. Follow the installation steps for your vehicle, tighten all fasteners to the correct torque, and re-check them after the first miles of driving and after off-road use. Have the alignment checked after steering work, and confirm brake lines, hoses and wiring have full clearance through suspension travel.
What’s included
The kit includes the HD tie rod and the HD drag link, as the title and description describe a tie rod and drag link kit.
Not included: Steering stabilizers, track bars and alignment services are not included. Plan for these separately if your build needs them.









