Overview
The Omix-ADA Drag Link Kit, part number 18050.11, is a drag link kit from Omix-ADA for rebuilding a steering linkage. The kit includes an outer tie rod end (18050.10), a tie rod end (18044.01) and a steering link adjuster (18044.06), so the main linkage pieces come in one kit.
Body styles for this kit are 2-door and 4-door models.
Rebuilding a steering linkage
Rebuilding a drag link usually means replacing the worn ends and adjusters together, since play in one joint loads the others. A kit like this one gives matched pieces for the linkage, which helps keep the steering geometry consistent after assembly. Measure the existing linkage before disassembling it so the new parts can be set to the same length.
Adjusters are the usual reason toe changes after a rebuild. Tighten jam nuts only after the length is set, then check the front alignment before driving. Inspect the tie rod boots and the drag link tube while the linkage is apart, and replace anything that is cracked or bent.
- Replace worn ends together
- Measure existing length before disassembly
- Recheck toe after assembly
Specifications
| Brand | Omix-ADA |
|---|---|
| Part number | 18050.11 |
| UPC | 804314290467 |
| Outer tie rod end | 18050.10 |
| Tie rod end | 18044.01 |
| Steering link adjuster | 18044.06 |
| Body styles noted | 2-door and 4-door models |
Vehicle fitment
Confirm your vehicle’s year, model and trim before ordering, and check each of the three included components against your steering linkage.
Confirm your vehicle’s year, model and trim before ordering. Ask the manufacturer which applications use each of the three included components.
Installation notes
Changing tie rod ends and the adjuster alters toe, so have the front alignment checked after the linkage is assembled.
What’s included
The kit includes outer tie rod end 18050.10, tie rod end 18044.01 and steering link adjuster 18044.06. Confirm whether a drag link tube is needed for your setup.















