Overview
The Trail Gear Drag Link, part 130589-1-KIT, is a front drag link. It fits 1979–1995 Toyota Pickup and 1984–1995 Toyota 4Runner models in the trims covered by its fitment.
The link is made from .250 in wall DOM 1.25 in tubing with precision tapped ends, and it is powder coated black. Each rod is test fitted to ensure that the rod ends thread in with the correct fit.
Key features
- Made from .250 in wall DOM 1.25 in tubing
- Precision tapped for rod ends
- Left side thread mark
- Powder coated black finish
- Each rod test fitted for correct rod end threading
Toyota linkage basics
On a Toyota pickup or 4Runner, the drag link transfers steering movement from the steering box to the knuckle on the driver side. Because the link runs across the front of the axle, its ends must line up square with the steering arms, and a bent or worn link throws off toe and centering. Tapped ends allow the rod ends to be adjusted to the correct length.
Fresh powder coating helps slow rust, but the coating can still chip at the tube ends, so inspect those areas after trail use. Check that the rod ends are threaded fully and that jam nuts are tight before driving. Front alignment should follow any steering linkage change to restore correct toe and straight-ahead steering.
- Inspect coating at the tube ends
- Check rod end threads and jam nuts
- Re-check toe after any linkage change
Specifications
| Brand | Trail Gear |
|---|---|
| Part number | 130589-1-KIT |
| UPC | 70000621556 |
| Tubing | 1.25 in DOM |
| Wall thickness | .250 in |
| Finish | Powder coated black |
| Position | Front |
| Thread mark | Left side |
Vehicle fitment
It fits the 1984–1995 Toyota 4Runner in DLX and SR5 trims, and the 1979–1995 Toyota Pickup in Base, Base Turbo, DLX, DLX Turbo, SR5 and SR5 Turbo trims.
Other Toyota models, and model years outside those listed, are not covered by this fitment. Confirm your vehicle’s year, model and trim before ordering.
What’s included
The package is a single drag link assembly with tapped ends. Check the contents against your installation before starting.








