Overview
The Skyjacker 136 is a set of front Softride coil springs for a 6 inch suspension lift. The springs are preset and formed from 5160H chromium alloy and powder coated to resist corrosion. They fit the Ford and Mazda models in the fitment section below.
These springs are for a 6 inch front lift on the models listed below. Front coil springs change ride height and steering geometry, so they should be matched to the rest of the lift setup.
Key features
- Preset and formed for a 6 inch lift
- 5160H chromium alloy for higher tensile strength and longer life
- Powder coated finish that resists corrosion
- Front position, set of 2 springs
- Black finish
- Limited lifetime warranty from Skyjacker
Choosing a 6 inch front setup
A 6 inch front lift is a large change in ride height, so it should be planned as a complete setup rather than a single part. Front springs alter steering geometry and the load on the front axle, which makes it important to pair them with shocks, control arm limits and brake lines sized for the new position. Many owners also review the rear suspension so the truck sits level and handles predictably.
Tire size matters once the front rises. Larger tires may rub the fender or inner liner during full steering lock, and wheel offset can change clearance. Look for signs of binding at full turn, check that the bump stops still engage correctly, and keep the front and rear heights balanced when planning later upgrades to the suspension.
- Match shock length to the new front height
- Check tire clearance at full steering lock
- Review rear height to keep the truck level
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 136 |
| UPC | 803696102252 |
| Lift height | 6 inch |
| Position | Front |
| Quantity | Set of 2 |
| Material | 5160H chromium alloy |
| Finish | Black, powder coated |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
The fitment covers these vehicles:
- 1983–1997 Ford Ranger, including XL, XLT, STX and Sport trims
- 1984–1990 Ford Bronco II
- 1991–1994 Ford Explorer, including the Sport
- 1994–1997 Mazda B2300 and B4000, and 1994–1996 Mazda B3000
- 1992–1994 Mazda Navajo
Full-size Ford Bronco and F-Series trucks are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because front springs change ride height, have the wheel alignment checked after installation. Support the vehicle securely and control spring compression with proper tools.
What’s included
A set of 2 front Softride coil springs.
Not included: Shock absorbers and other lift components are not included. Single coils are also available separately.









