Overview
Part number 174 is a Softride front spring set that raises the front end 4 inch. It is made to fit older Ford Bronco, F-100 and F-150 models in the years and trims shown below, and each set contains two springs.
The coils are preset and formed from 5160H chromium alloy with a black powder coat. Skyjacker describes them as a direct-fit option and includes a limited lifetime warranty.
Key features
- 4 inch lift height at the front
- Set of two springs
- Preset 5160H chromium alloy coils
- Black powder coat finish
- Limited lifetime warranty from Skyjacker
Front lift and ride quality
A 4 inch front lift changes how the truck sits and how the front wheels move through a bump. Springs that are preset help hold the new height steady, but the rest of the front end still sets how the truck rides. Expect a slightly firmer feel on rough roads, and check that the wheels sit straight after the first few miles of driving to confirm the setup is settled.
Front-end changes also affect steering and tire wear. Look at the bump stops, which may need to be adjusted or replaced so they engage at the right point. Inspect ball joints and control arm bushings during installation, since worn parts can make a higher front end feel loose on the highway and can cause uneven wear across the tread.
- Adjust or replace bump stops if they no longer engage
- Check wheels for straight tracking after installation
- Watch for uneven tire wear over the first months
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 174 |
| UPC | 803696103525 |
| Product line | Softride |
| Lift height | 4 inch |
| Position | Front |
| Quantity | Set of 2 |
| Color | Black |
| Material | 5160H chromium alloy, preset and formed |
| Finish | Powder coated |
Vehicle fitment
Vehicles in Skyjacker’s list: Ford Bronco 1966–1979 (Base, Custom, Northland, Ranger, Ranger XLT, Roadster, Wagon), Ford Bronco Sport 1975–1977, Ford F-100 1970–1972 (Base) and Ford F-150 1977–1979 in its Base, Custom, Northland, Ranger, Ranger Lariat, Ranger XLT and XLT trims.
Vehicles outside these four entries, or from later years, are not part of this fitment. Match your trim to the list first.
Installation notes
Raising the front by 4 inch changes front alignment settings, so schedule an alignment check once the springs are in.
What’s included
Each set contains two front coil springs. Not included: Shock absorbers and other lift components are not included. Plan for them separately before installing the springs.









