Overview
The Skyjacker 188 is a pair of 8 inch lift Softride front coil springs for 1980–1996 Ford Bronco and F-150 trucks. Each spring is preset and formed from 5160H chromium alloy, a material designed for higher tensile strength.
Front coil springs carry a large share of the truck’s weight at each corner, so spring height and rate shape how the front end sits after a lift. This set is a direct fit for the Bronco and F-150 models covered in the fitment section below.
Key features
- 8 inch lift height for a front Softride coil spring setup
- Preset and formed from 5160H chromium alloy with higher tensile strength
- Powder coated black finish to resist corrosion
- Sold as a set of 2 springs
- Direct fit for the covered Bronco and F-150 models
- Limited lifetime warranty
Before you install
Front coil springs work together with the shocks, control arms and steering linkage, so a change in height affects more than ride. Once the new springs are in, the front axle sits at a different angle, which can change the tie rod and drag link geometry. Check for bump stop contact at full compression and inspect the brake hoses for stretch, since they may sit closer to the frame after a lift.
Spring wear usually shows as sagging height on one side, cracked coils near the seat, or a noisy front end over bumps. Replacing springs in pairs keeps both sides matched. If you plan a lift larger than stock, consider bump stops and a steering stabilizer check, since related parts are often replaced at the same time. Re-torque the spring seat bolts after the first few drives.
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | 188 |
| UPC | 803696104812 |
| Lift height | 8 inch |
| Position | Front |
| Quantity | Set of 2 |
| Material | 5160H chromium alloy |
| Finish | Black, powder coated |
| Fitment type | Direct fit |
| Warranty | Limited lifetime |
Vehicle fitment
It fits the 1980–1996 Ford Bronco in Custom, Eddie Bauer, Ranger XLT, XL, XLS, XLT, XLT Lariat, XLT Nite and XLT Sport trims, and the 1980–1996 Ford F-150 in Base, Custom, Eddie Bauer, Ranger, Ranger Lariat, Ranger XLT, Special, XL, XLS, XLT and XLT Lariat trims.
Both entries end at 1996, so later Bronco and F-150 generations are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Because the front height changes, have the front alignment checked once the springs are installed. Support the truck on stands rather than a jack alone while working on the suspension.
What’s included
A set of 2 Skyjacker 8 inch Softride front coil springs in black.
Not included: Individual coils are available separately. Shocks, brackets and hardware are not part of this set.








