Overview
The Skyjacker Softride Rear Coil Springs, part number JK20RSR, are rear springs for the Jeep Wrangler JK, giving a 2 to 2.5 inch rear lift. They are sold as a pair. Skyjacker lists them for 2007–2018 Wrangler JK 2-door and 4-door models, across the anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
The springs are preset and formed from 5160H chromium alloy, powder coated to resist corrosion, and come with a limited lifetime warranty.
Key features
- Rear springs for a 2 to 2.5 inch lift
- Sold as a pair
- Preset and formed from 5160H chromium alloy
- Powder coated to resist corrosion
- Limited lifetime warranty
Matching shocks and rear height
Raising the rear of a Wrangler JK changes the length and angle of the rear shocks, so their suitability should be checked before the springs go in. Shocks designed for stock height may be too short, which can limit travel or put strain on the mounts. Inspecting the bushings, seals and mounting hardware while the springs are out is a sensible routine.
Rear springs that sit higher also change the geometry of the rear axle, so bump stops and brake line length deserve a look. Replacing rear springs in a pair keeps both sides at the same height, which helps the vehicle track straight and keeps tire wear even.
- Check shock length and travel before installation
- Inspect bump stops and brake lines after the lift
- Recheck bolt torque after the first few drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JK20RSR |
| Type | Rear coil spring |
| Lift | 2 to 2.5 inches |
| Quantity | Pair |
| Material | 5160H chromium alloy |
| Finish | Powder coated |
Vehicle fitment
Skyjacker lists these springs for the 2007–2018 Jeep Wrangler JK in the 70th and 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, in 2-door and Unlimited 4-door form.
Wrangler JL, TJ and other Jeep models are not in the list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
These are rear springs for a 2 to 2.5 inch lift on the JK. Check your rear shocks against the new height before fitting.






