Overview
The Skyjacker 6 Inch Lift Front Dual Rate Long Travel Coil Spring Set, part number JC60FDR, is a black front coil spring set with a 5 to 6.5 inch height range. It fits 1984–2001 Jeep Cherokee XJ models in the Base, Briarwood, Chief, Classic, Country, Laredo, Limited, Pioneer, SE and Sport trims, and 1986–1992 Jeep Comanche models in the Base, Chief, Custom, Eliminator, Laredo, Pioneer, X and XLS trims.
The springs are dual rate and long travel, and they fit the front only.
Key features
- Dual rate coil spring design
- Long travel
- Front location
- Height range of 5 to 6.5 inches
- Black finish
Dual rate springs explained
A dual rate coil spring uses two different spring rates in one unit. The softer rate controls ordinary road bumps, and the firmer rate engages as the suspension compresses further. Long travel springs are designed to allow more suspension movement, which helps the tires stay in contact on uneven ground.
Because the front springs change the ride and steering feel, check the shock length and the front end geometry after fitting. Inspect the spring seats and rubber isolators at service intervals. A front-only change can make the nose sit differently from the rear, so measure both ends with the vehicle level.
- Check shock length after the front springs change
- Inspect spring seats and isolators at service
- Measure front and rear height on level ground
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | JC60FDR |
| Type | Front coil spring set |
| Location | Front |
| Height range | 5 to 6.5 inches |
| Color | Black |
Vehicle fitment
It fits the 1984–2001 Jeep Cherokee XJ and the 1986–1992 Jeep Comanche in the trims named above.
Other Cherokee generations and Jeep models, and years outside those listed, are not covered. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Check the rear and shock setup against the new height before driving, and follow standard front coil spring installation procedures for your vehicle.






