Overview
The Skyjacker YJ45RS is a 4 inch Rock Ready double wrap rear leaf spring for the 1987–1995 Jeep Wrangler (YJ). It is a single rear spring meant for lifted YJs running 4 inch lifted springs, and it belongs to Skyjacker’s Softride range.
Skyjacker builds the YJ45RS from American steel, with each leaf shot peened using hard steel pellets at very high velocities. Peening raises the tensile strength of the steel, which Skyjacker says is needed to reach the wheel travel and ride quality of the design without shortening spring life.
Skyjacker uses bolt-style clips, which avoid the friction of cinch-style clips. The tapered leaves flex more at their ends and spread load over a larger area.
Key features
- Rear position, single spring
- Shot peened American steel leaves
- Bolt-style clips that Skyjacker says eliminate friction
- Tapered leaves that flex more at the ends
- Lift height range of 0 to 4.99 inches
- Direct fit listed
Rear spring and driveline
A rear leaf spring locates the axle and carries the rear load, so its arch and clamp condition affect rear ride height and axle position. Lifting a YJ changes the angle between the pinion and the driveline, which is why a rear spring change is normally paired with a driveline check.
The shackles, hangers and spring eyes take movement every time the axle travels. Worn shackle bushings let the axle wander under braking and acceleration. Shock mounts can bend when the spring seats at a new height, so look at them while the spring is off.
- Inspect shackles and hangers for wear
- Check pinion angle after a lift
- Look for bent shock mounts
- Torque U-bolts after the first trail runs
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | YJ45RS |
| UPC | 803696169842 |
| Product line | Rock Ready double wrap |
| Position | Rear |
| Spring quantity | Single spring |
| Lift | 4 inch |
| Lift height range | 0 to 4.99 inches |
| Material | American steel, shot peened leaves |
| Clip style | Bolt style |
| Bushings | Conflicting: one field says rubber bushings included, another says not included. Confirm with Skyjacker. |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 1987–1995 Jeep Wrangler (YJ), covering nine YJ trims from Base to Sport.
It fits the YJ only. Match your year, model and trim to the fitment before ordering, including for the 1997–2006 Wrangler TJ, the 2004–2006 Wrangler LJ, the later JK Wrangler and Cherokee XJ.
Installation notes
The bushing details conflict, so confirm bushing supply with Skyjacker before the install starts. A 4 inch lift changes rear pinion angle, so check driveline angles and alignment afterward. Block the frame and support the rear axle before removing the original spring.
What’s included
One rear leaf spring, supplied as a single unit.
Not included: Spring bushings. Check bushing supply before installing.





