Overview
The Skyjacker RB220 is a rear lift block that raises the rear of a vehicle by 2 inches. It is sold in pairs, and Skyjacker says riser blocks should never be used on the front of any vehicle.
The block is sold as a universal fit, but it is a lift part that has to match the spring and axle setup on the vehicle it goes into. Check its height and mounting against your rear suspension before buying.
Key features
- 2 inch rear lift height
- Sold in pairs
- Rear use only
Rear lift and pinion angle
Rear lift blocks raise the axle relative to the frame, which increases the pinion angle. A larger angle can lead to driveline vibration, especially at highway speeds, and it puts more stress on the U-joints. Measuring the driveline angles after installation is the surest way to see whether the change is within what the driveshaft can handle.
Blocks work alongside the leaf springs and axle mounts, so their height should suit the rest of the rear suspension. Shock length, brake line slack and bump stop contact all change with a rear lift. Check the U-bolts after the first drives and recheck the axle position once the truck has settled.
- Measure driveline angles after installation
- Check U-bolts for tightness
- Look for brake line tension at full droop
- Confirm shock length suits the new height
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | SKYRB220 |
| Product type | Rear lift block |
| Lift | 2 inches |
| Sold as | Pair |
| Position | Rear only |
Vehicle fitment
A rear lift block is sized to the spring and axle it sits on, so confirm the block fits your rear suspension before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Riser blocks raise the rear of the vehicle, which changes the rear pinion angle, so measure the driveline angles after installation. Skyjacker says never to use a riser block on the front of any vehicle.
What’s included
The block is sold in pairs, so each side of the rear axle gets one.






