Overview
The 95-407SD is a 4 inch rear lift block sold in pairs. It is a universal fit block.
Key features
- 4 inch rear lift
- Sold in pairs
Riser blocks and front axles
Riser blocks change the height of the leaf spring pack, which moves the axle and changes the angles of the driveline and the brake lines. On a rear axle this is a common modification, but it still needs a careful check of the fasteners, the shock length and the brake hoses after installation.
Riser blocks should stay on the rear of the vehicle. Adding height to the front axle with a block can upset steering geometry and load parts that were not designed for it. If more front lift is needed, a dedicated front lift kit engineered for steering and suspension geometry is the better route. Keep the spring packs in good condition too, since sagging springs reduce the benefit of any block.
- Check brake hose length after lifting the rear
- Recheck U-bolt torque after the first drives
- Inspect shock mounts for stretch or binding
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 95-407SD |
| UPC | 614901201178 |
| Lift height | 4 in |
| Position | Rear |
| Sold as | Pair |
Vehicle fitment
It is a universal fit block, so check the spring pack and axle setup for your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Pro Comp warns against using any riser block on the front of a vehicle, so these go on the rear only.
What’s included
A pair of rear lift blocks.




