Select your vehicle
-13%

Pro Comp 3.5 Inch Rear Lift Block – 95-350B

Pro Comp Suspension

Shop Pro Comp Suspension Blocks on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • 3.5 in tapered rear lift block, part number 95-350B
  • Cast iron riser, sold as a pair
  • Universal fit

Description

Overview

The Pro Comp Suspension 95-350B is a 3.5 inch rear lift block with a cast iron riser. The block is tapered to improve the vehicle driveshaft angle and is sold as a pair.

Key features

  • 3.5 inch rear lift
  • Cast iron riser block
  • Tapered design
  • Sold as a pair

Cast iron riser considerations

Cast iron risers are heavy and hold up well to road grime, which suits a rear block that sits below the spring pack. The weight is worth noting when lifting the vehicle or moving the block into place. Cast iron is also a good match for the U-bolt clamp load, since the surfaces stay firm under torque.

Because blocks are sold as a pair, both rear springs get the same height. Mismatched blocks can pull the axle out of square and change driveline angles. Inspect the block faces for cracks or flat spots before reuse, and replace the U-bolts if their threads or bends look damaged.

  • Check both blocks for matching height
  • Inspect block faces for cracks
  • Look over U-bolt threads before reuse
  • Confirm the axle sits square after install

Specifications

Brand Pro Comp Suspension
Part number 95-350B
UPC 614901112030
Lift height 3.5 in
Position Rear
Material Cast iron
Taper Tapered
Sold as Pair

Vehicle fitment

Check the leaf spring and axle setup for your vehicle before ordering.

Confirm your vehicle’s year, model and trim before ordering.

What’s included

A pair of rear lift blocks.

SKU: EXP95-350B Category:

Specification

Shipping weight 16.00 lbs
Package dimensions 14.00 × 5.00 × 3.00 in
brands

Questions & Answers

How much lift does the Pro Comp 95-350B give?

3.5 inches at the rear. The block has a cast iron riser, is tapered to improve the vehicle driveshaft angle, and is sold as a pair, as shown in the specifications table.

What is the Pro Comp 95-350B riser made from?

Cast iron. The block is a tapered rear riser sold as a pair, which Pro Comp describes as improving the vehicle driveshaft angle. The part number 95-350B and UPC 614901112030 are listed.

Is the Pro Comp 95-350B tapered?

Yes. The taper is what improves the driveshaft angle. Check your leaf spring and axle setup before installing the block.

Should both sides be replaced at once?

Yes. Blocks are sold as a pair so both rear springs get the same height. Replace worn U-bolts at the same time to keep clamping even on each side.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Pro Comp Suspension Blocks on Amazon