Overview
The Pro Comp Suspension 95-100FB is a 1 inch rear lift block with an aluminum riser. It is non-tapered, which Pro Comp says keeps the vehicle driveshaft angle, and it is sold as a pair.
Key features
- 1 inch rear lift
- Aluminum riser block
- Non-tapered design
- Sold as a pair
Driveline angle after a lift
A rear lift changes the angle between the transmission output and the front of the driveshaft. Angles that run too steep add vibration and load the U-joints faster. A block that keeps the driveshaft angle closer to its original setting reduces that load, although the final angle depends on the rest of the suspension.
A lift block also changes how the axle sits under the spring, which can affect brake hose length and pinion position. After fitting, look at the brake hoses for stretch and check that nothing rubs at full articulation. Re-check the driveline angle after the first several drives, since springs settle slightly with use.
- Check brake hoses for stretch
- Look for rubbing at full articulation
- Inspect U-joints for play
- Recheck driveline angle after settling
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 95-100FB |
| UPC | 614901698985 |
| Lift height | 1 in |
| Position | Rear |
| Material | Aluminum riser |
| Taper | Non-tapered |
| Sold as | Pair |
Vehicle fitment
Lift blocks depend on the leaf spring and axle setup, so confirm the block suits your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Install the block on the rear leaf spring pack and check the driveshaft angle afterward. Never place a riser block on the front of a vehicle.
What’s included
A pair of rear lift blocks.






