Overview
The Pro Comp Suspension 95-400B is a 4 inch rear lift block with a cast iron riser. It is tapered to improve the driveshaft angle and sold as a pair.
Key features
- 4 inch rear lift
- Cast iron riser block
- Tapered design
- Sold as a pair
Driveshaft angle after lifting
Raising the rear of a leaf spring vehicle changes the pinion angle, and that is where driveshaft angle becomes a problem. A tapered block reduces the change compared with a flat block of the same height, which helps keep the driveline working smoothly. Even so, the driveshaft should be measured after the lift is installed, because the angle depends on the spring pack and axle location as well as the block.
Blocks often call for longer U-bolts, so check that the hardware still clamps the spring pack properly after the change. Look for vibration at highway speed, clicks from the driveshaft and wear on the U-joints. Replace worn U-joints before they fail, and recheck the block bolts after the first few drives.
- Measure pinion and driveshaft angles after install
- Confirm U-bolt length for the new spring height
- Check shock and brake line length
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 95-400B |
| UPC | 614901112047 |
| Lift height | 4 in |
| Position | Rear |
| Material | Cast iron |
| Taper | Tapered |
| Sold as | Pair |
Vehicle fitment
It is a universal fit block. Check your spring and axle setup before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
A pair of rear lift blocks.






