Overview
The Icon Suspension 5 inch blocks with rear bumpstop, part number 195275, are fabricated suspension blocks for the rear position, sold as a pair. Each block is flat like the factory block and has a built in bump-stop tang.
The block is designed for the rear position. Confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- Flat design like the factory block
- Built in bump-stop tang
- Fabricated block construction
- Sold as a pair of two blocks
Choosing a block height
Suspension blocks set the rear axle position relative to the frame, which changes pinion angle and driveline operating angles. A taller block increases that change, so the driveshaft and U-joints may need a closer look after installation. Choose a block height only after measuring the existing driveline angle and comparing it to the joint limits for your vehicle.
Blocks are often installed alongside a shock length change, a brake line check and a review of the track bar, since the axle moves within its arc. Recheck the U-bolts after the first drive and retorque them as the fasteners settle. Inspect the bushings and rubber bump stops over time for cracking or compression.
- Measure pinion angle before and after installation
- Check brake line length after raising the axle
- Retorque U-bolts after the first few drives
Specifications
| Brand | Icon Suspension |
|---|---|
| Part number | 195275 |
| UPC | 70000481292 |
| Block size | 5 inch |
| Position | Rear |
| Type | Fabricated block |
| Bump stop | Built in bump-stop tang |
| Quantity | 2 blocks, sold as a pair |
Vehicle fitment
No vehicle years, makes or models are listed. The Direct Fit tag is not a vehicle reference, so check your vehicle’s rear suspension mounting before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Changing the block height affects driveline angles, so check them after installation.
What’s included
Two fabricated 5 inch blocks with built in bump-stop tang, sold as a pair.





