Select your vehicle

Skyjacker 2 Inch Leveling Lift Kit – TTU20MS

Skyjacker

$182.40In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 17, 2026 3:40 PM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Skyjacker 2 inch aluminum spacer leveling kit, part number TTU20MS
  • Front strut spacers, black finish
  • Adds 2 to 2.5 inches and removes factory nose-down rake
  • Fits 2000–2006 Toyota Tundra

Description

Overview

The Skyjacker 2 Inch Leveling Lift Kit, part number TTU20MS, is an aluminum spacer leveling kit for the Toyota Tundra. It mounts front strut spacers in a black finish and fits 2000–2006 Tundra models in the Base, Limited and SR5 trims.

The kit adds 2 to 2.5 inches of lift to the struts or coil springs, which removes the factory nose-down rake and allows larger wheels and tires. No cutting or welding is needed, and standard tools are enough for the job.

Key features

  • Aluminum front strut spacers
  • Front lift only
  • Adds 2 to 2.5 inches of lift
  • Removes factory nose-down rake
  • No cutting or welding required

Leveling and front-only lift

A front leveling kit raises the nose so the truck sits level, which is useful when the rear sits higher than the front from the factory. Front spacers change the position of the strut or spring but leave the rear suspension untouched. The result is a more even stance, although the rear may still look low on a loaded truck.

Larger tires need checking against the fender, the inner liner and the steering stops. Front-only lifts also change the caster angle slightly, so an alignment is worth considering after installation. Inspect the strut mounts and upper bearings at each service, since they carry the extra load of the spacer.

  • Check tire clearance at full steering lock
  • Inspect strut mounts and bearings at service
  • Consider an alignment after installation

Specifications

Brand Skyjacker
Part number TTU20MS
Type Aluminum spacer leveling kit
Front lift method Strut spacers
Rear lift Front lift only
Spacer material Aluminum
Finish Black
Listed tire size 32 x 11.5 x 16
Listed wheel size 16 x 8, 3.5 backspace

Vehicle fitment

It fits the 2000–2006 Toyota Tundra in the Base, Limited and SR5 trims.

Tundra years outside 2000–2006 and other Toyota models are not covered. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

The spacers are fitted without cutting or welding, using standard tools. Check the tire and wheel sizes before choosing larger tires.

Fitment

VehicleYearsTrims
Toyota Tundra2000–2006Base, Limited, SR5

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Does the TTU20MS fit a 2000–2006 Toyota Tundra?

It fits the 2000–2006 Tundra in the Base, Limited and SR5 trims. Confirm your year and trim before ordering, since other Toyota models are not covered.

How much lift does the TTU20MS give?

It adds 2 to 2.5 inches of lift to the struts or coil springs and removes the factory nose-down rake.

Does fitting the kit need cutting or welding?

No. Skyjacker says no cutting or welding is required and standard tools will do the job. Check the listed tire and wheel sizes before choosing larger tires, because the spacers change the clearance.

Should the rear be lifted to match a front leveling kit?

Not always. A front-only lift levels the stance, but a rear lift can be added later if the rear sits low. Keep the front and rear heights close so the steering and suspension geometry stay balanced.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon