Overview
The California Super Trucks CSS-T16-3 is a coil over spacer for the 2005–2017 Toyota Tacoma. It is intended to raise the vehicle, and California Super Trucks says its parts are fabricated and machined in house.
Lift height is 3 in. Confirm the height you need for your build before fitting.
Key features
- Coil over spacer for raising the vehicle
- Parts fabricated and machined in house by California Super Trucks
- Lift height is 3 in.
Before you lift with spacers
A coil over spacer sits between the upper spring perch and the coil spring, raising the body without replacing the shocks or control arms. Because the spring itself is not changed, ride and spring rate stay close to stock, though the vehicle will sit higher and can feel different over bumps and dips.
Raising the body changes driveline and CV joint angles, and it can move the bump stops into a different position. After installation, check that the shock extension is not near its limit at full droop, and look for rubbing at full steering lock and wear on the front sway bar end links. Longer travel is limited by shock length, so a spacer lift works best when the existing shocks have room.
- Inspect shock mounts and bump stops for wear
- Recheck torque on spring perch hardware after the first drive
- Watch for tire rub at full steering lock
Specifications
| Brand | California Super Trucks |
|---|---|
| Part number | CSS-T16-3 |
| UPC | 70000678332 |
| Product type | Coil over spacer |
| Lift height | 3 in. |
| Fitment type | Direct fit |
| Manufacturing | Fabricated and machined in house |
Vehicle fitment
It fits the 2005–2017 Toyota Tacoma in Base, Limited, Pre Runner, SR, SR5, TRD Off-Road, TRD Pro, TRD Sport and X-Runner trims.
Other Toyota models and years are not covered. Match your year, model and trim before ordering.
Installation notes
Any lift changes alignment and driveline angles, so have the alignment checked after installation.
What’s included
It is a single coil over spacer.








