Overview
The Skyjacker BUK2074DF is a 2 inch block and U-bolt kit for suspension lift work. Skyjacker says its rear blocks come in pairs and warns never to use a riser block on the front of any vehicle.
It is a 2 in. lift kit, sold as a direct fit kit. Make sure the year, model and trim match your truck before ordering.
Key features
- 2 inch lift block and U-bolt kit
- Rear blocks come in pairs
- Riser blocks are not for the front of any vehicle
- Direct Fit wording, no vehicle named
Before you install
A block lift moves the axle away from the frame, which changes the angles of the driveshaft and the control arm geometry. Blocks are a simple way to gain ride height, but they do not change suspension travel. Plan for brake line, sway bar link and shock length checks after the change, because each can become tight.
Before fitting, clean the spring pad and mounting surfaces, and inspect the U-bolts for thread damage. Retorque the nuts after the first few drives and recheck them periodically. If a block is worn, cracked or corroded, replace it rather than reuse it.
- Inspect the U-bolt threads before reuse
- Recheck nut torque after the first drives
- Look for bent brake lines and stretched cables
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | BUK2074DF |
| UPC | 803696220475 |
| Component | Block and U-bolt kit |
| Lift | 2 in. |
| Sold as | Rear blocks in pairs |
Vehicle fitment
Make sure the year, model and trim match your truck before ordering, then compare the kit with your suspension and axle setup.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm the block position before installing, because Skyjacker warns never to use a riser block on the front of any vehicle. Lift blocks change axle position, so check driveline angles after the lift.
What’s included
Check the U-bolt and nut count against your installation plan before starting.









