Overview
The Skyjacker BUK12571 is a 1.25 inch rear lift block and U-bolt kit. Each rear block raises the rear suspension, and the blocks come in pairs. Fitment is direct fit only, so confirm fit for your vehicle’s year, model and trim before ordering.
Key features
- 1.25 inch lift height
- Rear position
- Blocks supplied in pairs
- Block and U-bolt kit format
Lift blocks and driveline angles
A rear lift block raises the axle body relative to the frame, which changes the angle of the driveshaft and pinion. Steeper angles can cause vibration and wear on U-joints, so the lift height and the driveline both matter. Longer U-bolts, shock extensions and brake line clearance are often checked at the same time as the blocks are fitted.
Because the blocks are for the rear only, keep them away from the front axle entirely. After fitting, recheck the driveshaft angles, the brake line length and the bump stop clearance. Tighten all U-bolt nuts after a short drive and again after the first few trail runs.
- Check driveshaft angles after installation
- Inspect brake lines for stretch
- Retorque U-bolt nuts after the first drives
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | BUK12571 |
| UPC | 803696204154 |
| Product line | Suspension Block and U-Bolt Kit |
| Lift height | 1.25 in |
| Position | Rear |
| Quantity | Blocks come in pairs |
Vehicle fitment
This kit names no vehicle, year or chassis code. Its fitment statement reads Direct Fit alone, so compare the application with manufacturer specifications.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Never fit a riser block to the front of any vehicle; these rear blocks are for the rear axle only. A lift changes the rear driveline angles, so check them after installation.
What’s included
The kit includes rear blocks in pairs with U-bolts. Count the U-bolts, nuts and washers against the installation steps before starting the work.








