Overview
The Skyjacker BUK2072 is a block and U-bolt kit that provides a 2 in. lift. It carries a direct fit label with no year, make or model attached.
Lift and driveline basics
A block and U-bolt kit raises the axle by placing blocks between the spring and the axle, with U-bolts clamping the assembly in place. The added height changes the angle between the axle and driveshaft, and the shocks and brake lines may need a check to keep their travel and length in range.
Good installations start with clean spring seats and square blocks. Torque the U-bolt nuts evenly, then recheck them after the first drives, since the nuts can loosen as the springs settle. Measure driveline angles after the work is done, and look for vibration or clicking at the joints, which can point to a problem that needs attention.
Blocks are a simple way to add height, and they leave the spring rate itself unchanged, so ride and load behavior stay close to stock. Plan for the related parts that often get reviewed at the same time, such as shocks and brake hoses, before deciding how much lift suits the way you drive.
- Re-torque U-bolts after the first drives
- Check brake lines for length and strain
- Measure driveline angles after installation
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | BUK2072 |
| UPC | 803696116587 |
| Product line | Block and U-Bolt Kit |
| Lift height | 2 in. |
Vehicle fitment
No vehicle is named for this kit. Fit depends on the vehicle, so check your year, model and trim before buying.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Confirm whether the blocks mount at the front or rear before installing. A 2 in. lift changes driveline angles, so check them once the work is done.
What’s included
The kit is a block and U-bolt kit. Check the package contents against your installation before starting.








