Overview
The Skyjacker BUK2061 is a 2 inch rear lift block and U-bolt kit that raises the rear of the vehicle. The blocks come in pairs. Before buying, confirm the year, model and trim the kit suits for your truck.
Key features
- 2 inch lift height
- Rear lift blocks supplied in pairs
- Includes the U-bolt kit hardware
- Direct fit only, with no vehicle named.
Rear lift with 2 inch blocks
A 2 inch rear block lifts the axle relative to the springs, which typically changes the ride height and the angle the driveshaft works at. Modest lifts are common for adding tire clearance, but the rear suspension still has to match the new height. Attention to the rear axle location and the shock length helps the vehicle keep its handling.
Blocks and U-bolts are often replaced together, since the original U-bolts may not reach around a raised axle. Check the spring pad surfaces for wear and clean them before fitting. Re-torque the U-bolt nuts after the first drives, since the clamp load can settle.
- Check shock length after the lift
- Inspect U-bolts for stretch or rust
- Recheck the driveshaft angle after the work
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | BUK2061 |
| UPC | 803696177076 |
| Product line | Suspension Block and U-Bolt Kit |
| Lift height | 2 in |
| Position | Rear |
| Quantity | Pairs |
Vehicle fitment
No vehicle years or models are given for this kit. Confirm fit for your vehicle’s year, model and trim before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Do not put a riser block on the front axle. Because the lift changes rear driveline angles, check the angles after the blocks and U-bolts are fitted.
What’s included
The kit is a block and U-bolt set with the blocks in pairs. Count the U-bolts and nuts against the installation steps before starting.






