Select your vehicle

TeraFlex HD Frame Brace and Drag Link Flip Kit – 1600440

TeraFlex

Shop on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Fits 2007–2015 Jeep Wrangler JK 2-door and Unlimited models
  • Forged HD front flip draglink, 50% stronger than the factory draglink
  • Frame brace and frame-side trackbar drop bracket included
  • Designed for lifts of 3 inches and higher
  • Welding required to install

Description

Overview

The TeraFlex HD Frame Brace and Drag Link Flip Kit, part 1600440, is a front steering and frame upgrade for lifted Jeep Wrangler JK models from 2007 to 2015. It combines a forged HD draglink that is flipped over the knuckle with a frame brace and a frame-side trackbar drop bracket, aimed at JK owners running lifts of 3 inches and higher.

The flip design changes how the draglink mounts. A new tapered insert seats the draglink into the knuckle, and the forged draglink threads into the factory adjusting sleeve. TeraFlex rates the HD draglink as 50% stronger than the factory unit, which is intended to reduce front end shimmy and other alignment issues on lifted JKs. The frame brace strengthens the frame and reduces any excess front end movement.

Key features

  • Forged HD front flip draglink that mounts over the knuckle with a tapered insert
  • Draglink rated 50% stronger than the factory draglink
  • Threads into the factory adjusting sleeve
  • Frame brace to strengthen the frame
  • Frame-side trackbar drop bracket to help keep steering geometry correct
  • Designed for lifts over 3 inches

Why the lift changes steering

A lifted Jeep changes the angles of the steering linkage, and the stock draglink can start to shimmy or wander as those angles change. A frame brace stiffens the body where the steering components mount, so less of the movement reaches the steering. Paired with a flipped draglink and a trackbar drop bracket, the kit addresses several steering changes together rather than one part at a time.

Lifted Wranglers often need more than one linkage part to run correctly. Check the track bar, steering stabilizer, control arm bushings and tie rod ends for wear before or after the install. A welded frame brace is a permanent change, so inspect the welds at regular intervals and watch for cracking near the brace ends.

  • Check track bar and bushings for wear
  • Inspect frame welds at regular intervals
  • Confirm alignment after lift and linkage work

Specifications

Brand TeraFlex
Part number 1600440
UPC 843885022480
Draglink strength 50% stronger than the factory draglink
Lift height Designed for lifts over 3 inches
Installation Welding required

Vehicle fitment

It fits 2007–2015 Jeep Wrangler (JK) models, including 2-door and Unlimited versions in the 70th Anniversary, Rubicon, Sahara, Sport and X trims.

Other Wrangler generations (TJ, LJ, JL) and Jeep models outside this list are not covered, and later JK model years are not on the list. Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Welding is required to install this kit, so plan on a shop with steel welding equipment or a qualified installer. Because the kit changes steering geometry, have front end alignment checked once it is in place.

What’s included

The kit includes the forged HD flip draglink, a frame-side trackbar drop bracket and a frame brace.

SKU: TER1600440 Category:

Specification

Shipping weight 30.60 lbs
Package dimensions 36.00 × 6.40 × 6.40 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (JK)2007–201570th Anniversary, Rubicon, Sahara, Sport, Unlimited 70th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited X, X

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Will the TeraFlex 1600440 fit a 2007–2015 Jeep Wrangler JK?

Yes. The kit fits 2007–2015 Jeep Wrangler (JK) in 2-door and Unlimited versions across the 70th Anniversary, Rubicon, Sahara, Sport and X trims. Confirm your year, model and trim before ordering.

Does this kit require welding?

Yes. Welding is required to install the kit, which also includes a frame brace. Plan on a shop with steel welding equipment or a qualified installer.

What lift height is the 1600440 designed for?

It is designed for lifts over 3 inches, and it suits vehicles with 3 inch and higher lifts. Confirm suitability for your lift height before ordering.

Is the frame brace included?

Yes. The kit includes a frame brace that strengthens the frame, along with a frame-side trackbar drop bracket and the forged HD flip draglink. The brace is meant to reduce front end shimmy and excess movement.

How often should a frame brace be inspected?

Inspect the frame brace and its welds at regular intervals, especially after rough trail use. Look for cracks at the weld edges and for loose hardware at the frame mounts. Recheck front alignment after any steering or suspension work, since frame movement can change toe.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop on Amazon