Overview
The TeraFlex Extreme HD Flipped Drag Link Kit, part 1853930, is a fully forged drag link for 2007–2016 Jeep Wrangler JK models that comes configured with the drag link flipped. It is intended for conditions where factory steering parts tend to fail.
The drag link is installed from the top of the steering knuckle in its flipped configuration. The forged 1.25 inch O.D. body has an oversized DOM factory-style adjusting collar and pinch clamp. The joint uses a 4140 chrome moly ball and stud in a 1045 carbon steel housing with adjustable preload tension, and it fits OEM 17-inch wheels.
Key features
- Comes configured flipped, installed from the top of the knuckle
- Fully forged drag link to eliminate excess movement during hard steering
- Oversized DOM factory-style adjusting collar and pinch clamp
- 4140 chrome moly ball and stud in a 1045 carbon steel housing
- Adjustable preload tension for long-term durability
- Fully forged body designed for extreme conditions
- Fits OEM 17-inch wheel
Flipped link installation tips
A flipped drag link changes the mounting angle at the knuckle, which can alter steering feel and the way the link moves through its travel. Before tightening anything, dry-fit the link, confirm it sits clear of nearby brake lines and the tie rod, and verify that the steering stops are not being used as a mechanical limit. Work slowly, since small changes at the knuckle affect the whole steering arc.
After the link is in place, check that the adjusting collar centers the steering and that both ends have full movement without binding. Plan an alignment check afterward, because the new angle changes toe. Keep an eye on the joints during the first few drives and look for any play that develops as the parts settle.
- Dry-fit the link before final tightening
- Check clearance to brake lines and the tie rod
- Confirm steering centers after adjustment
- Schedule an alignment check
Specifications
| Brand | TeraFlex |
|---|---|
| Part number | 1853930 |
| UPC | 843885033332 |
| Drag link outside diameter | 1.25 inch O.D., fully forged |
| Ball and stud | 4140 chrome moly |
| Housing | 1045 carbon steel |
| Configuration | Flipped, installed from the top of the steering knuckle |
| Wheel fitment | Fits OEM 17-inch wheel |
Vehicle fitment
It fits 2007–2016 Jeep Wrangler (JK) models, 2-door and Unlimited, across the 70th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims.
Wrangler TJ, LJ and JL models and other Jeep models are not on the list, and later JK years are not shown. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit is supplied in the flipped configuration, with the drag link installed from the top of the steering knuckle. Check the fit against your knuckle and steering setup before final tightening, and have alignment checked afterward.
What’s included
The kit includes the fully forged drag link with its joint, adjusting collar and pinch clamp, supplied in the flipped configuration.









