Overview
The Fox Racing Shox 883-02-129 is a front 2.0 bump stop kit for 2007 to 2018 Jeep Wrangler (JK) vehicles, in both two-door and four-door models. The kit must be cut to fit the factory bump stop holder.
Fox developed this bump stop with top off-road racing teams to add suspension travel in a compact, light package. Nitrogen pressure is adjusted through the aluminum Schrader cap, and the replaceable Delrin pad keeps operation quiet. The kit comes as a pair.
Key features
- Front position
- Cut to fit the factory bump stop holder
- Adjustable nitrogen pressure through the Schrader cap
- Replaceable Delrin pad
- Two- and four-door models
- Comes as a pair
Choosing a bump stop setup
A front bump stop works at the end of suspension travel, where it limits how far the shock can compress and cushions the hard stop. Its effect depends on how it seats in the holder, so the mounting point matters as much as the pad itself. Stops are often checked whenever shocks or springs are serviced.
Adjustable nitrogen pressure changes how the stop feels near the bottom of travel. Make small changes and test on a safe trail, then recheck after the first few drives. Keep the valve cap clean and sealed so dirt does not reach the valve.
- Confirm the holder is solid before and after any cut
- Inspect the Delrin pad at each service
- Check that the stop clears the shock body at full compression
Specifications
| Brand | Fox Racing Shox |
|---|---|
| Part number | 883-02-129 |
| UPC | 700007189625 |
| Position | Front |
| Fitment type | Universal Fit |
| Pad | Replaceable Delrin |
| Adjustment | Nitrogen pressure via aluminum Schrader cap |
| Quantity | Pair |
Vehicle fitment
The manufacturer fitment list names the 2007–2018 Jeep Wrangler (JK) in these trims: 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S, and the Unlimited 70th Anniversary, Unlimited 75th Anniversary, Unlimited Rubicon, Unlimited Sahara, Unlimited Sport, Unlimited Sport S, Unlimited X and X trims.
Other Wrangler generations such as the TJ, LJ or JL are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Installation requires cutting the factory bump stop holder to fit the Fox stop, so plan the cut before mounting. Nitrogen pressure is set through the Schrader cap. Cutting near suspension parts needs care, so a qualified shop should do the work if you are unsure.
What’s included
The kit includes a pair of bump stops.
Not included: Plan for the factory bump stop holder that the kit is cut to fit, plus any hardware you need.
























