Overview
The Rubicon Express RE7525 is a 5.5 inch Extreme-Duty long arm lift kit with a rear Tri-Link for the 2004–2006 Jeep Wrangler LJ Unlimited. The lift height range is 5 to 6.99 inches, and shocks are not included.
This is the LJ version of the long arm design used on the TJ. Longer control arms improve lifted geometry, adding stability on and off road, reducing torque roll and improving trail traction compared with short arm systems.
The Tri-Link replaces the rear track bar, letting the axle move straight up and down through its travel. It also adds anti-squat for steep climbs.
Key features
- 5.5 inch lift with a listed range of 5 to 6.99 inches
- Chromoly long arms built from 4130 chromoly tubing
- Rear Tri-Link in place of the rear track bar
- Builder Ball misalignment joint, rated for up to 32 degrees
- Adjustable control arms with serviceable Super-Flex spherical ball joints
- Tuned lift springs and PT-Meg Super-Ride bushings
Caring for long arm joints
Long arm joints carry the axle’s load at every corner, so they wear faster than stock joints when the vehicle sees repeated trail use. The serviceable Super-Flex ball joints can be greased, which keeps them moving freely and helps them last longer. Look at the boot seals regularly.
Inspect the Builder Ball joint and the Tri-Link ends when the Jeep is up on stands. Feel for play by hand, and check the bushings for cracks or separation from the metal sleeve. Clean mud and grit from the joints after deep water or wet trail days.
If a joint feels loose or a boot is torn, replace the part before the next trip rather than waiting for a noise to develop. Keep a record of service dates so the next check is easy to schedule.
- Grease serviceable joints at each service
- Check the Tri-Link ends after rough trails
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7525 |
| UPC | 614901442083 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Long arm |
| Kit type | Extreme-Duty long arm |
| Rear lift method | 3-link (Tri-Link) |
| Control arm material | 4130 chromoly, .250 wall |
| Misalignment joint | Builder Ball, up to 32 degrees, 3 inch OD housing |
| Shocks included | No |
| Fitment | Direct fit |
Vehicle fitment
It fits the 2004–2006 Jeep Wrangler (LJ), including the Unlimited and Unlimited Rubicon models.
Fit covers the Unlimited models only. Check trim and body style before you buy.
Installation notes
A 5 to 6.99 inch lift with long arms needs a driveline angle check and a full alignment after installation. The kit bolts on to factory Dana 35 and Dana 44 rear ends.
What’s included
The kit includes front and rear control arms, the rear Tri-Link, the Builder Ball, tuned lift springs, PT-Meg Super-Ride bushings and a three-piece belly pan.
Not included: shocks.


