Overview
The Rubicon Express RXT Monotube Shock Absorber, part number RXT2810B, is a rear shock with eyelet-to-eyelet mounts and a 12-inch stroke. It fits the 1997-2006 Jeep Wrangler TJ at stock height, with no lift or drop.
The shock has a slim black body and is designed as a running replacement for the prior version of the RXT line. A black urethane shock boot and all necessary mounting hardware are included.
Key features
- Rear position
- Eyelet-to-eyelet mounts
- 12-inch stroke
- Slim black body
- Black urethane shock boot included
- Gas charged, per the specifications
Eyelet mounts and fitting
Eyelet-to-eyelet mounts use a bolt through a bushing at each end of the shock, which makes installation simpler when the mounts match. The bushings absorb small movements, but they wear over time and can become loose or noisy. Before buying, check that the existing mounts on the vehicle are the same eyelet style.
Rear shocks on a TJ cope with axle movement, road bumps and load changes, so the shock body and hardware see steady stress. Keep the boot in place, check for oil on the body, and inspect the mounts when you rotate tires or service the rear end. Replacing worn bushings during the job helps the new shock perform as intended.
- Match the mount style before ordering
- Inspect eyelet bushings for cracks
- Tighten the hardware after the first few drives
- Check the boot for tears during routine service
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXT2810B |
| UPC | 614901453683 |
| Shock series | RXT Monotube |
| Position | Rear |
| Extended length | 28.5 inches |
| Collapsed length | 16.5 inches |
| Stroke | 12 inches |
| Mounts | Eyelet/eyelet |
| Lift | 0 inch lift or drop |
| Charge | Gas |
| Included | Black urethane shock boot, mounting hardware |
Vehicle fitment
It fits the 1997-2006 Jeep Wrangler TJ at stock height. It is not designed for the YJ, JK or other Wrangler generations.
The listed fitment does not include the YJ, JK or other Wrangler generations. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The shock uses eyelet mounts at both ends, so check that your existing mounts are eyelet style before installing it.






