Overview
The Daystar KU01005 is a white twin-tube hydraulic front shock absorber built for Jeep Wrangler models with a 1.75 inch lift. It fits 2- and 4-door Wranglers from the 1997–2006 TJ, the 2004–2006 LJ and the 2007–2018 JK generations.
Companion part KJ09137BK is for 2007–2010 JK Wranglers with a 1.75 inch lift, and companion part KJ09103BK is also named for this shock. Black Daystar shock bushings and a boot come with the shock. The valving is designed to resist foaming and shock fade under severe conditions.
Key features
- Designed for 2- and 4-door Wranglers
- 1.75 inch lift listing
- Twin-tube hydraulic performance design
- Resists foaming and shock fade under severe conditions.
- Black Daystar shock bushings and boot included
- Tuned valving for the application
- White finish
Wrangler lift and companion parts
Wrangler shocks need to match the lift height as well as the year and trim, since a lift changes the length the shock must cover at ride height. A front shock set for one setup can bottom out or run short after a change. Measure the lift after installation and compare it with the lift the shock is built for.
Companion parts such as bump stops, brake lines and steering components often change when a lift goes in, so check them during the same install. Front shocks wear faster on rough trails, and a split boot or cracked bushing lets dirt into the shaft. Replacing the bushings and boot as a set keeps the shock moving freely.
- Check brake lines for stretch after a lift
- Inspect bump stops for wear
- Replace shocks in pairs on the same axle
Specifications
| Brand | Daystar |
|---|---|
| Part number | KU01005 |
| UPC | 814423019187 |
| Position | Front |
| Lift | 1.75 in |
| Shock type | Twin-tube hydraulic |
| Finish | White |
| Included | Black Daystar bushings and boot |
| Companion parts named | KJ09103BK; KJ09137BK |
Vehicle fitment
It fits 2007–2018 Jeep Wrangler (JK) in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X versions, plus Unlimited versions of those trims. It also fits 2004–2006 Jeep Wrangler (LJ) Unlimited and Unlimited Rubicon, and 1997–2006 Jeep Wrangler (TJ) in the 65th Anniversary Edition, Rubicon, SE, Sahara, Sport and X versions.
Wrangler JL models are not in this list, and the JK years end at 2018. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Companion part numbers point to specific setups, so confirm which shock your lift requires before buying.
What’s included
One shock with black Daystar bushings and boot.
Not included: KJ09103BK and KJ09137BK are separate items and are not included with this shock.









