Overview
The Rubicon Express Rear Axle Bracket Kit, part number RE9969, is a builder’s kit of brackets for mounting a custom rear axle in a Jeep Wrangler TJ. It is made for the 1997–2006 Jeep Wrangler (TJ), and the kit includes brackets RE9970 through RE9980.
The brackets are laser cut from 3/16 inch cold rolled steel and then CNC formed for precise bends. The steel is bare, without a coating, and the kit is designed for a builder who welds the brackets in place.
Key features
- Laser cut from 3/16 inch cold rolled steel
- CNC formed for precise bends
- Bare steel finish
- Builder’s kit that requires welding
- Allows customer axle installation
- Includes brackets RE9970 through RE9980
Choosing a custom rear axle
A custom rear axle for a TJ has to clear the frame, fuel tank and brake lines while keeping the spring and shock locations workable. Axle width, housing length and gear ratio should be decided before cutting or welding. The brackets set the mounting positions, so the axle sits where the suspension expects it.
Bare steel brackets rust over time if left unprotected, so coat the parts after welding and fitting. Choose a paint or primer rated for underbody use, and touch up scratches near weld zones. Check the mounts after every few trail outings for cracks or fastener movement, and keep notes on the torque used during assembly.
- Coat bare steel after welding is complete
- Check brake line routing after axle install
- Inspect weld toes for cracks at service
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE9969 |
| UPC | 614901442342 |
| Material | 3/16 inch cold rolled steel |
| Finish | Bare steel |
| Axle location | Rear axle |
| Installation | Welding required |
| Included brackets | RE9970 through RE9980 |
Vehicle fitment
The kit is made for the 1997–2006 Jeep Wrangler (TJ), in several trim levels.
The LJ and JK Wranglers are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The kit requires welding, so it suits a builder who can weld the brackets to the frame. It allows customer axle installation. Welding structural mounts should be done by a qualified welder.
What’s included
Brackets RE9970 through RE9980, with the RE9969 kit. Not included: the custom axle, which the builder supplies.








