Select your vehicle

Fabrication 2.25″ Collar

Rock Hard 4x4 Parts

Shop Rock Hard 4X4 Parts Gussets Tabs on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rock Hard 4×4 Parts 2.25 inch fabrication collar, part number RH-1225
  • Proprietary locking collar design for fabrication projects
  • Universal fit, not tied to a specific vehicle
  • Supports a range of mounting methods, per the manufacturer

Description

Overview

The Rock Hard 4×4 Parts fabrication 2.25 inch collar, part number RH-1225, is a locking collar for strengthening fabrication projects. Rock Hard 4×4 Parts describes its proprietary locking collars as a way to add strength to a build while allowing many different mounting methods.

It is universal fit, so it is not tied to a particular year, make or model. Its use depends on the tube or component it is fitted to, and the 2.25 inch size is the main dimension.

Key features

  • Proprietary locking collar design
  • 2.25 inch size
  • Supports a range of mounting methods
  • Universal fit

Choosing a collar size

A collar is only as useful as its fit on the tube or component it joins. Measure the outside diameter of the member first and compare it with the collar size, then decide whether the collar will slide over the tube, seat against a shoulder or sit inside a larger member. A snug fit makes welding easier to control and keeps the layout square during assembly.

Collars are usually combined with other fabrication work, such as sleeves, gussets or mounting plates. Plan the weld sequence before tacking anything in place, and check that clearances around the collar still allow for steering, axle travel and any tires you intend to run. Inspect welds after the first few trail sessions, looking for cracks near the collar edges.

  • Measure the tube outside diameter first
  • Plan the weld order before tacking
  • Check clearance for steering and axle travel
  • Inspect welds after early trail use

Specifications

Brand Rock Hard 4×4 Parts
Part number RH-1225 (also shown as RFPRH-1225)
UPC 70000451695
Size 2.25 inch
Fitment Universal fit

Vehicle fitment

It is universal fit and no vehicle is tied to it. Check the 2.25 inch size against the tube or component you plan to use it with.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Confirm the 2.25 inch size against your tube or component before committing to a fabrication layout, because no other dimensions are stated.

What’s included

Count the collars against your build before planning the layout.

SKU: RFPRH-1225 Category:

Specification

Shipping weight 3.00 lbs
Package dimensions 8.00 × 6.30 × 3.40 in
brands

Questions & Answers

What is the Rock Hard 4x4 Parts RH-1225 collar?

It is a 2.25 inch fabrication collar from Rock Hard 4x4 Parts. It is a proprietary locking collar for strengthening fabrication projects and supports several mounting methods.

Does the RH-1225 collar fit a specific vehicle?

No vehicle is named. It is universal fit, so it is not tied to a year, make or model. Check the 2.25 inch size against your own build.

What part number is the 2.25 inch collar?

The part number is RH-1225. Some listings show it as RFPRH-1225, so use either number when you contact the manufacturer or compare parts.

Are collars like this usually welded in place?

Collars used in fabrication are commonly welded or locked to the member they join, depending on the layout. Confirm the fit and weld plan before committing, and inspect the joint after the first few uses.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Rock Hard 4X4 Parts Gussets Tabs on Amazon