Select your vehicle
-13%

Rubicon Express Mono-Tube Shock Absorber – RXJ511B

Rubicon Express

$19.23In stock
Buy on Amazon

See similar parts on Amazon

Price and availability as of Nov 18, 2026 11:30 AM MST, from Amazon.com, and subject to change. The Amazon listing has the current details.

Check out with your Amazon account. Amazon handles delivery and returns.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Rubicon Express extreme-duty mono-tube rear shock, part number RXJ511B, sold each
  • Gas-charged design for a 4-inch lift; extended length 32.6, collapsed 19.3
  • Designed for the 1987-1995 Jeep Wrangler YJ.

Description

Overview

The Rubicon Express Mono-Tube Shock Absorber, part number RXJ511B, is a gas-charged extreme-duty monotube rear shock for a Jeep with a 4-inch lift. It is designed for the 1987-1995 Jeep Wrangler YJ.

The extreme-duty monotube line is tuned for each application, so the damping controls the vehicle on rough terrain while keeping ride quality and stability on long trips.

Key features

  • Extreme-duty mono-tube design
  • Gas-charged body
  • Rear position
  • Built for a 4-inch lift.

Rear shock wear and mounting

Rear shocks carry much of the load on a YJ’s leaf spring rear axle, and they work through a wide range of motion on trail obstacles. Gas-charged units keep damping more consistent as they heat up, which helps with repeated bumps. When the shock is changed, check the upper and lower mounts, because a bent eye or worn bushing shifts the angle of the shock and wears the new unit early.

Rear shocks are often replaced alongside leaf spring bushings, shackles, and bump stops, since a worn spring system transfers extra load to the shock. Look for an oily film on the body, a shock that feels soft or hard on one side, or a clunk at the mounts. Tighten mounting bolts evenly and recheck them after the first drive.

  • Inspect leaf spring bushings and shackles
  • Check rear shock eyes for bends
  • Recheck mounting bolts after the first drive

Specifications

Brand Rubicon Express
Part number RXJ511B
UPC 614901451726
Shock series Extreme-Duty Mono-Tube
Position Rear
Lift 4 inch
Extended length 32.6 inches
Collapsed length 19.3 inches
Charge Gas
Quantity Each

Vehicle fitment

This rear shock is designed for the 1987-1995 Jeep Wrangler YJ, across the Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims.

The listed fitment does not include the TJ or JK Wrangler. Confirm your vehicle’s year, model and trim before ordering.

SKU: R/ERXJ511B Category:

Specification

Shipping weight 6.00 lbs
Package dimensions 36.00 × 4.00 × 4.00 in
brands

Fitment

VehicleYearsTrims
Jeep Wrangler (YJ)1987–1995Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara, Sport

Use “Select your vehicle” at the top of the page to check this part against your vehicle.

Questions & Answers

Is the RXJ511B a rear shock?

Yes. It is a rear shock for a Jeep with a 4-inch lift, designed for the 1987-1995 Jeep Wrangler YJ. Match the position to the shock you are replacing before installing.

What are the lengths of the RXJ511B?

The product gives 32.6 extended and 19.3 collapsed, without a unit listed in the specifications. Check the dimensions against your mounts and your vehicle's ride height before installing the shock.

Is the RXJ511B sold in pairs?

No. It is sold each, so a pair of rear shocks needs two of these part numbers, one for each side of the vehicle.

Can a rear shock be upgraded without changing the springs?

Often, yes, but the result depends on the spring rate and lift height. A heavier-duty shock can improve control on a stock spring setup, while a lifted vehicle may need different springs to keep ride height and shock travel correct. Check how the shock sits at full droop before deciding.

Ready to order?

Order this part on Amazon and check out with your Amazon account. Amazon handles delivery and returns.

Buy on Amazon