Overview
The Fabtech FTS7181 is a rear performance twin tube shock absorber with a 2 inch hydraulic body, for the 1987–1995 Jeep Wrangler (YJ) and the 2005–2013 Toyota Tacoma. It is rated for a w/6 in. lift.
Owners replacing a worn rear shock on an older YJ or a Tacoma can compare collapsed and extended lengths, mount codes and valving. It is a non-reservoir design.
Key features
- High flow 9 stage valving, which Fabtech says reduces shock fade at high speeds
- Closed cell foam insert
- Twin tube hydraulic body with a 2 inch diameter
- 9/16 inch chrome hardened piston rod
- 1 3/8 inch OD piston
- White powdercoat finish with a blue Fabtech logo
- Travel length of 11.4 in.
Rear shock swap tips
A rear shock on an older Jeep or Tacoma does more than soften bumps. It works with the springs and axle to keep the tires planted, and it helps the rear end feel stable when loaded. A twin tube hydraulic design relies on oil and a piston rod, so the seals and valving determine how the shock behaves over time.
Before replacing a rear shock, compare the collapsed and extended lengths of the old unit with the new one. Check the upper and lower mounts, and clean the mount surfaces so the new shock seats properly. Worn bushings can make a new shock feel loose, so inspect them as well.
Rear shocks wear unevenly when the truck carries heavy loads or runs rough trails. Look for leaks, a clunk over bumps, or a soft feel in the body. Many owners replace both rear shocks at once for an even ride, which is a practical step when the springs are still in good shape.
Specifications
| Brand | Fabtech |
|---|---|
| Part number | FTS7181 |
| UPC | 674866010741 |
| Position | Rear |
| Shock series | Performance Shock |
| Shock type | Twin tube, hydraulic, no reservoir |
| Shock body diameter | 2 inch |
| Collapsed length | 27.54 in. |
| Extended length | 16.14 in. |
| Travel length | 11.4 in. |
| Piston rod | 9/16 inch chrome hardened |
| Piston | 1 3/8 inch OD |
| Valving | High flow 9 stage |
| Insert | Closed cell foam |
| Lower mount | S1 |
| Upper mount | EB1 |
| Lift rating | w/6 in. lift |
| Finish | White powdercoat with blue Fabtech logo |
Vehicle fitment
Fabtech’s manufacturer fitment list covers two applications: the 1987–1995 Jeep Wrangler (YJ) in Base, Islander, Laredo, Renegade, Rio Grande, S, SE, Sahara and Sport trims, and the 2005–2013 Toyota Tacoma in Base, Pre Runner and X-Runner trims.
The list does not include the TJ, LJ or JK Wrangler generations, or other Toyota trucks. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Match the listed lower mount S1 and upper mount EB1 against the shock coming off before you start the swap.
What’s included
The package contains one shock absorber.
Not included: Plan for mounting hardware before starting the swap, since it may be needed.


















