Overview
The Skyjacker Softride Hydro H7055 is a front shock absorber from the Hydro Series with red polyurethane bushings and a red boot. It is sold individually and covers a 2 to 6 in. lift range. It measures 13.54 in. collapsed and 22.75 in. extended with a 9.20 in. stroke. It fits Ford Bronco, F-Series and Explorer models, Isuzu Rodeo and Trooper, Jeep Wrangler YJ, Mazda and Toyota trucks, and several other vehicles.
This shock pairs with most Skyjacker lift kits and gives a street ride that stays firm enough for most off-road driving. It is a heavy-duty twin tube design with an internal rebound bumper, an oversize piston head and an expanded fluid reservoir.
Key features
- Multi-stage velocity sensitive valving for a firm feel on rough ground
- Heavy-duty twin tube construction with hydraulic action
- 5/8 in. diameter hardened double chrome rod
- Internal rebound bumper and oversize piston head
- Red polyurethane bushings and a red boot included
- Expanded fluid reservoir and heavy mileage white paint, described with minimum 240-salt protection
Choosing a lift height
A front shock does more than control bounce. After a lift changes the suspension geometry, it manages body roll and wheel hop on pavement, and off road it controls the axle when a tire drops into a rut. Longer travel and a larger reservoir help keep damping steady when the fluid heats up on long descents.
Before buying, match the shock to your installed lift rather than to the vehicle alone. Measure the suspension and compare it with the collapsed and extended lengths shown above. A shock that is too short can bottom out and stress the mounts, while one that is too long can bind near full droop. Replacing both front shocks together keeps the ride even from side to side.
- Inspect the polyurethane bushings for cracks before reinstalling
- Check the boot for tears that let dirt reach the shaft
- Look for fluid seepage along the body and shaft
- Replace bump stops that are cracked or compressed
Specifications
| Brand | Skyjacker |
|---|---|
| Part number | H7055 |
| UPC | 803696138657 |
| Product line | Softride Hydro, Hydro Series |
| Position | Front |
| Damping | Hydraulic |
| Collapsed length | 13.54 in. |
| Extended length | 22.75 in. |
| Shock stroke | 9.20 in. |
| Rod | 5/8 in. diameter, hardened double chrome |
| Bushings | Red polyurethane |
| Boot | Red |
| Lift range | 2 – 6 in. lift |
| Finish | Heavy mileage white paint |
| Corrosion protection | Minimum 240-salt corrosion protection |
| Sold as | Individually |
Vehicle fitment
It fits Ford Bronco models from 1966 to 1996 and Bronco II from 1984 to 1990, Ford Explorer from 1991 to 1994, Ford F-100 from 1970 to 1979, F-150 from 1975 to 1996, F-250 from 1977 to 1996 and F-350 from 1980 to 1996, plus Super Duty models from 2005 to 2016 and Ranger from 1983 to 1997. It also fits Isuzu Rodeo and Trooper, the Honda Passport from 1994 to 1995, International Scout II, Jeep Wrangler YJ from 1987 to 1995, Mazda B-series and Navajo, and Toyota 4Runner and Pickup models.
Ford F-150 fit ends in 1996. Confirm fit for your vehicle’s year, model and trim before ordering.
Installation notes
The bushings and boot are included in red and are part of the shock, so check that they are installed with the unit. Support the vehicle on jack stands before working under a front suspension.
What’s included
One Skyjacker Softride Hydro H7055 front shock absorber with red polyurethane bushings and a red boot. Sold individually, so a front axle with two sides needs two units.









