Overview
The Rubicon Express JT7145 is a 4.5/5.5 inch sport suspension lift kit with geometry correction brackets for the 2020–2026 Jeep Gladiator JT. It is a direct fit for the Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.
The rear lift uses coil springs, and the lift height range is 4 to 5.5 inches. The specifications list a 37-inch tire size and mark the shocks as not included, with no front or rear shock named.
The kit is designed to work on the road and off it, with the aim of improving handling on pavement. A lift of this size can change suspension and steering geometry, and the geometry correction brackets address those changes.
Key features
- 4.5/5.5 inch sport suspension lift
- Geometry correction brackets included
- Coil spring rear lift method
- Clearance for 37-inch tires, per the specifications
- Shocks not included
Shocks and the sport lift
Shocks are not included with this kit, so the existing shocks have to be checked before the install. Measure the shock length at full extension and compression, and compare it to the new ride height. A shock that is too short will bottom out, and a shock that is too long can bind the springs or the mounts. Replace the shocks as a pair when the old ones show leaks or fade.
Coil springs set the ride height at the rear, so the pinion angle and the rear control arms should be looked at once the truck is at its new height. Brake lines, the parking brake cable and the ABS wiring can also come under more tension, so check their slack after the first few drives. A lift of this kind benefits from a fresh alignment and a steering check before long road trips.
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJT7145 (JT7145) |
| Kit type | Sport suspension lift kit |
| Lift | 4.5 to 5.5 inch |
| Lift height range | 4 to 5.5 inches |
| Tire size | 37 inches |
| Rear lift method | Coil springs |
| Rear lift component | Coil spring |
| Shocks included | No |
| Fitment type | Direct fit |
Vehicle fitment
It is a direct fit for the 2020–2026 Jeep Gladiator in the Launch Edition, Mojave, Overland, Rubicon, Sport and Sport S trims.
Wrangler models and the Gladiator years outside 2020–2026 are not on this list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
A sport kit with geometry correction brackets changes the control arm angles and the pinion angle, so the alignment and driveline angles should be measured after the install.
What’s included
The specifications list coil spring lift components and geometry correction brackets for this sport kit. Shocks are not included, so the existing shocks need to be checked for length.
Not included: shocks.


















