Select your vehicle

Daystar Stinger Bump Stop – KU71091BK

Daystar

Shop Daystar Bump Stops on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Slickrock 4X4 is a participant in the Amazon Associates Program. As an Amazon Associate we earn from qualifying purchases.

  • Daystar KU71091BK Stinger bump stop with adjustable EVS foam inserts
  • EVS microcellular foam offered in two densities
  • Fully rebuildable, sold in pairs or individually
  • Mounts sold separately; racing-style bump can mounts suit most builds
  • Universal fit; no specific vehicle list

Description

Overview

The Daystar KU71091BK is a Stinger bump stop built for off-road suspensions that need firmer, adjustable control than conventional bump stops provide. Its design pairs EVS foam with a piston shaft, so owners can tune the firmness using one to three foam inserts per unit.

The Stinger is modeled on race bump stops used in several off-road niches. EVS foam is a microcellular material made in two densities, with a true progressive spring rate. The foam can be cycled thousands of times before it degrades.

A heavy gauge tube shell, machined for strength, houses the foam, and a bronze guide supports the piston shaft for long service life. The Stinger is fully rebuildable and comes in two lengths. Its design is intended as a lower cost alternative to nitrogen-charged bump stops.

Key features

  • Adjustable firmness with one to three EVS foam inserts per unit.
  • EVS microcellular foam offered in two densities
  • Progressive spring rate, designed for thousands of compression cycles
  • Machined outer shell from heavy gauge tubing
  • Bronze guide for the piston shaft to support long life
  • Fully rebuildable design, sold in pairs or individually

Tuning firmness with inserts

The number of foam inserts sets how firm the Stinger feels as the piston shaft moves into the shell. Fewer inserts give a softer end-of-travel contact, while more inserts add resistance sooner. Because the foam is progressive, each added insert changes the feel in a different way, so adjust one step at a time.

Before changing inserts, check the piston shaft and the bronze guide for scoring or dry spots. A clean, lightly lubricated guide helps the shaft move evenly and keeps the foam loaded in a consistent position. Confirm the length of the Stinger matches the travel your suspension needs before adjusting firmness.

When a Stinger is rebuilt, inspect the foam for compression set, cracking or uneven wear. Replace inserts that no longer return to shape, and keep the mounts tight since loose mounts change how the stop contacts the suspension.

  • Change one insert at a time
  • Check the piston shaft and guide for scoring
  • Inspect foam after each rebuild

Specifications

Brand Daystar
Part number KU71091BK
UPC 814423019989
Product line Stinger Bump Stop
Foam inserts Uses one to three EVS foam inserts.
Foam density Two densities of EVS foam available
Outer shell Machined heavy gauge tubing
Piston guide Bronze
Lengths Two different lengths
Sold as Pairs or individually
Rebuildable Fully rebuildable
Mount options Racing-style bump can mounts; weld-on and bolt-on mounts sold separately
Fitment Universal fit

Vehicle fitment

The Stinger is universal fit and can be adapted to many vehicles. No specific years, models or chassis codes are tied to it, so choose the length and mount type that match your own suspension layout.

Confirm your vehicle’s year, model and trim before ordering.

Installation notes

Racing-style bump can mounts suit most builds, while weld-on or bolt-on mounts are sold separately and must be selected to match your setup. Weld-on mounts require welding, so have that work done by a qualified fabricator before installing the stop.

What’s included

Stinger bump stops are sold in pairs or individually, in two different lengths, so confirm the quantity on your order.

Not included: Weld-on and bolt-on mounts, which are available separately.

SKU: DAYKU71091BK Category:

Specification

Shipping weight 8.00 lbs
Package dimensions 10.00 × 6.00 × 4.00 in
brands

Questions & Answers

Is the Daystar KU71091BK a vehicle-specific part?

No. It is universal fit and has no specific years, models or chassis codes tied to it. Confirm the length and mount type suit your suspension before ordering.

What does the EVS foam do in this Stinger?

EVS is a microcellular foam with a progressive spring rate. Each Stinger carries one to three foam inserts, which lets you adjust the firmness to suit your use.

Do the mounts come with the KU71091BK?

No. Weld-on and bolt-on mounts are sold separately. The Stinger is designed to work with most racing-style bump can mounts.

Can the KU71091BK be rebuilt?

Yes. The Stinger is fully rebuildable. It is sold in pairs or individually, in two different lengths, so confirm the quantity and length on your order before installing.

How do I know whether to use one, two or three foam inserts?

Start with the lightest setup and add inserts only if the stop bottoms out too often or feels too soft. Re-check the firmness after each change on a short trail run, since the right count depends on the vehicle and how it is used.

Find it on Amazon

Compare current versions and compatible options on Amazon, then check out with your Amazon account.

Shop Daystar Bump Stops on Amazon