Overview
The Rubicon Express RE7505 is a 5.5-inch Extreme-Duty long arm lift kit with a rear Tri-Link, made for the 1997–2002 Jeep Wrangler TJ. The lift falls within the 5 to 6.99-inch range. The kit is sold without shocks.
This long arm is a complete suspension replacement that uses longer control arms to improve geometry on a lifted vehicle. The longer arms add stability on and off road, reduce torque roll and improve trail traction compared with a standard short arm lift.
The rear Tri-Link replaces the rear track bar, which lets the wheel travel straight up and down. The link adds anti-squat on steep climbs and improves highway tracking.
Key features
- 5.5 inch lift with a listed range of 5 to 6.99 inches
- Chromoly long arms made from 4130 chromoly tubing
- Rear Tri-Link that replaces the rear track bar
- Builder Ball misalignment joint, rated by Rubicon Express for up to 32 degrees
- Adjustable control arms with serviceable Super-Flex spherical ball joints
- PT-Meg Super-Ride bushings, tuned lift springs and stainless steel brake lines
Long arm lift planning
Moving to a 5 to 6.99-inch lift with long arms is a larger change than a basic spring kit, so the rest of the vehicle has to be planned around it. Brake hose length, steering stop clearance and driveline angles all shift as the arms change position, and each one should be checked once the work is done. Plan the install in a shop with a rack and a clear checklist.
Because the kit ships without shocks, the shock choice is open. Match shock length to the new arm position and lift height, and consider whether the current shocks have enough travel. Replacing worn bump stops and bushings during the same job is a practical way to keep the ride stable over time.
- Plan brake hose length for the higher lift
- Check rear Tri-Link bolts after the first trail runs
- Confirm steering stop clearance after alignment
- Schedule a driveline inspection at the first service
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE7505 |
| UPC | 614901442045 |
| Lift height range | 5 to 6.99 inches |
| Suspension type | Long arm |
| Kit type | Extreme-Duty long arm |
| Rear lift method | 3-link (Tri-Link) |
| Control arm material | 4130 chromoly, .250 wall |
| Misalignment joint | Builder Ball, up to 32 degrees, 3 inch OD housing |
| Belly pan | Three-piece, for transfer case and transmission access |
| Shocks included | No |
| Fitment | Direct fit |
Vehicle fitment
It fits the 1997–2002 Jeep Wrangler (TJ), including the SE, Sahara and Sport models.
Check your vehicle’s year, model and body style before ordering, including whether it is a 2003–2006 TJ, JK or YJ.
Installation notes
A 5 to 6.99-inch lift changes alignment and driveline angles considerably, so a driveline check and a full alignment are needed after installation. It is bolt-on for factory Dana 35 and Dana 44 rear axles.
What’s included
The kit includes front and rear control arms, the rear Tri-Link, the Builder Ball, PT-Meg Super-Ride bushings, tuned lift springs, stainless steel brake lines and a three-piece belly pan.
Not included: shocks.


