Overview
The Rubicon Express RE1270 is a pair of 2-inch lift blocks. They add height without increasing spring rates and are made for rear axles with a spring-over design only.
The blocks are universal fit. U-bolts are sold separately, so choose a U-bolt kit for your axle before you order.
Key features
- 2-inch lift
- Adds height without increasing spring rates
- Rear axle use only
- Spring-over axle design only
- Sold as a pair
Before you buy
A spring-over lift block sits between the axle and the leaf spring, so it raises the axle without changing how the spring is built. Because the spring pack stays the same, the ride height change is easiest to judge by measuring the gap at each wheel before and after installation. Watch how the rear driveline angles change once the axle moves up, since a higher axle can shift pinion angle and affect the driveshaft.
Blocks are often installed alongside other parts that handle the new height. Brake lines, shock length and the rear driveshaft may need checking, and extended brake lines are a common related upgrade. Plan the work so the U-bolts, nuts and spring hardware are all torqued again after the first few drives.
- Check shock length and travel after installation
- Inspect brake lines for stretch or rubbing
- Re-tighten U-bolt nuts after the first trail runs
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RE1270 |
| UPC | 614901437669 |
| Lift height | 2 inches |
| Position | Rear axle |
| Axle design | Spring-over axle only |
| Sold as | Pair |
| U-bolts | Sold separately |
| Fitment | Universal fit |
Vehicle fitment
The blocks are for vehicles with a spring-over rear axle design. No specific model is named, so confirm the axle design before ordering.
Confirm your vehicle’s year, model and trim before ordering, and check that the rear axle is spring-over.





