Overview
The Icon Suspension 4 inch fabricated block is a flat rear lift block that raises the body four inches while keeping the shape of the factory block. Each block has a built-in bump-stop tang, so the bump stop is part of the block itself. The kit is sold as a pair. Match the block to your vehicle’s year, model and trim before buying.
Key features
- Fabricated 4 inch lift block
- Flat design, like the factory block
- Built-in bump-stop tang
- Sold as a pair
Rear lift block considerations
A rear lift block raises the axle relative to the frame, so the driveline, brake lines and shock geometry all change. Lifted rear ends often change the driveshaft angle, which can add vibration at highway speed. Checking the angle and any slip-yoke engagement after installation helps show whether a driveshaft correction is needed.
The flat shape of this block is meant to keep the look of the factory block, and the built-in bump-stop tang means the bump stop moves with the block. Because the block is a spacer, the axle sits in a new position relative to the springs and bump stops, so check that the bump stop still contacts the axle and not the frame at full compression. Inspect the U-bolts and mounting hardware after the first few drives.
- Check driveshaft angles after installation
- Inspect brake hose length and flex
- Confirm bump-stop contact at full compression
- Recheck U-bolts after the first drives
Specifications
| Brand | Icon Suspension |
|---|---|
| Item number | 194275 |
| UPC | 70000547404 |
| Lift height | 4 inches |
| Block type | Fabricated, flat |
| Bump stop | Built-in rear bump-stop tang |
| Quantity | 2 blocks, sold as a pair |
Vehicle fitment
The block is marked Direct Fit but does not identify a year, make, model or chassis code. Confirm fit for your vehicle before ordering.
Confirm your vehicle’s year, model and trim before ordering.
What’s included
Two 4 inch fabricated blocks, sold as a pair.






