Overview
The Pro Comp 4-inch rear lift block, part number 95-401, raises the rear of a vehicle by 4 inches. It is sold individually and is made for rear use only.
A lift block is a spacer placed between the leaf spring and the axle to add height at the rear. It raises the rear ride height, which changes the rear driveline angle and the alignment, so match the block to your vehicle’s setup.
Key features
- 4-inch rear lift
- For the rear of the vehicle only
- Sold individually
Choosing a lift height
Lift height is a trade-off between added clearance and the change it brings to driveline and steering geometry. A taller block moves the pinion further from its original angle, which can produce vibration at highway speeds. Riders who mostly drive on pavement often keep the lift modest, while off-road users accept more driveline work in exchange for clearance.
Because each block is a separate purchase, plan the full rear set before ordering. Both sides should match so the axle sits square and the springs carry load evenly. Upgrades such as a driveshaft with a double cardan joint or a slip yoke are often considered when a rear block raises the angle a long way, so check the driveline while the vehicle is on stands.
- Keep both rear blocks identical
- Check brake line length after the lift
- Re-check the driveline at each oil change
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 95-401 |
| UPC | 614901121957 |
| Lift | 4 inches |
| Position | Rear |
| Sold as | Individual block |
Vehicle fitment
Confirm the correct height for your vehicle and suspension before ordering.
Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use this block only at the rear. Pro Comp says never to use a riser block on the front of any vehicle. Because the block raises the rear, check driveline angles and alignment after installation.
What’s included
One 4-inch rear lift block. Each block is sold individually, so a rear set needs one block for each side.





