Overview
The Pro Comp Suspension 3-inch rear lift block, part number 95-300DB, is a non-tapered block that raises the rear of a vehicle by 3 inches. Its non-tapered shape is designed to maintain the vehicle’s driveshaft angle.
This block is universal fit, so it is not tied to a named vehicle. Check the mounting layout against your axle and spring before installing it.
Key features
- 3-inch rear lift
- Non-tapered design to maintain the driveshaft angle
- Universal fit
Driveshaft angle and block choice
A lift raises the axle, which changes the angle between the axle pinion and the driveshaft. A tapered block shifts that angle further, while a non-tapered block keeps the two faces parallel. Keeping the angle within a workable range helps the driveshaft joints run smoothly and reduces vibration at speed.
When choosing a block, consider the lift height together with the rest of the suspension. Longer brake lines, emergency brake cables and shock travel may need attention at 3 inches. Pairing a block with a new set of longer shocks is common, since existing shocks can bottom out at the new height. Keep the spring seats clean and check the block faces for corrosion when fitting.
- Check u-joints for play after the first drive
- Look for vibration above normal highway speeds
- Inspect the block for cracks after rough trails
Specifications
| Brand | Pro Comp Suspension |
|---|---|
| Part number | 95-300DB |
| UPC | 614901110401 |
| Lift | 3 inches (rear) |
| Taper | Non-tapered |
Vehicle fitment
This rear lift block is universal fit and is not tied to a specific vehicle. Confirm the 3-inch lift suits your rear suspension before ordering.
Installation notes
Because the block changes rear ride height, measure driveline angles after installation. The non-tapered design is meant to limit the change to the driveshaft angle that a tapered block would cause.
What’s included
One 3-inch rear lift block. Check the package contents for bolts or other hardware before starting the installation.






