Overview
The Rubicon Express JT7102NR is a 4.5/5.5 inch standard adjustable arm suspension lift kit with 2.5-inch monotube shocks for the 2020–2026 Jeep Gladiator JT. It is a direct fit for the 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims.
The package keeps the control arms and other components in place, so the existing arm geometry stays in use. It is built to give a smooth ride on the road and on the trail.
The rear lift uses coil springs and the lift height range is 4 to 5.5 inches. The specifications list 2.5-inch monotube shocks at the front and rear as included, with a 37-inch tire size.
Key features
- 4.5/5.5 inch standard adjustable arm suspension lift
- 2.5-inch monotube shocks at the front and rear, included
- Control arms and other components are kept in place.
- Coil spring rear lift method
- Clearance for 37-inch tires, per the specifications
Shock length and ride height
Monotube shocks use a single tube design that handles heat well, which suits trucks that spend long stretches on rough ground. When a lift raises the ride height, the shock must still reach its full range without running out of travel at either end. Check that the shock mounts clear the new arm position and that the shock eyes are not pinched at full droop.
Control arms left in place mean the lift works through the existing arm geometry, so pay attention to bushings. Worn bushings change how the axle moves under load and can make a new lift feel loose. Replacing worn bushings during the install is a practical step, and it keeps the axle location predictable. Keep a record of the alignment readings so later changes can be measured against them.
- Check shock eye clearance at full droop
- Inspect control arm bushings before installing
- Record the alignment readings after the install
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | R/EJT7102NR (JT7102NR) |
| Kit type | Standard adjustable arm suspension lift kit |
| Lift | 4.5/5.5 inch |
| Lift height range | 4 to 5.5 inches |
| Tire size | 37 inches |
| Front shocks | 2.5 monotube |
| Rear shocks | 2.5 monotube |
| Rear lift method | Coil springs |
| Shocks included | Yes |
| Fitment type | Direct fit |
Vehicle fitment
This kit fits the 2020–2026 Jeep Gladiator in the 80th Anniversary, Altitude, High Altitude, Launch Edition, Mojave, Overland, Rubicon, Sport, Sport S, Willys and Willys Sport trims.
The Wrangler JL and JK are not part of this Gladiator fitment list. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Standard adjustable arms with monotube shocks change the ride height and damping, so the shock length, the alignment and the driveline angles should be checked after the install.
What’s included
The 2.5-inch monotube shocks at both ends come with the kit, along with the coil spring rear lift and the standard adjustable arm components.

















