Overview
The Rubicon Express 2.0 Adjustable Reservoir Monotube Front Shock, part number RXR713, is a remote reservoir shock for the front of a Jeep Wrangler JK. It fits 2007 and later Wrangler JK models, 2 and 4 door, with a 2.5 to 3.5 inch lift, which covers the 2007-2018 JK model years.
The external reservoir adds fluid capacity to help shed heat. The gas-charged monotube body is tuned to Rubicon Express spring rates and uses JK-specific custom valving with eight stages of compression adjustability.
Key features
- Remote reservoir for added cooling and fluid capacity.
- Eight stages of compression adjustability
- JK-specific custom valving
- Gas-charged 2-inch seamless alloy body with epoxy painted finish
- Black anodized, CNC machined 6061-T6 ends
- 3/4-inch hard chrome shaft
- Wiper seal to keep contamination out
- Large -6 hose with 360-degree swivel banjos
- Reservoir mounts included
Before you buy
A remote reservoir shock moves the gas and fluid storage away from the damper body, which gives the oil more room to cool between hard runs. On a Wrangler JK that matters on long grades, sand washes and repeated articulation, when a standard shock can run hot and lose consistent damping. Adjustable compression lets you tune how firmly the front end reacts to rough ground and highway speeds.
Before buying, match the shock to the lift you actually run. Front shocks work with the knuckle and upper mount geometry, so a change in lift or tire size can change the stroke you need. The reservoir also needs clearance and a route for its hose, so check the space near the inner fender before ordering.
- Measure your current shock installed length before ordering
- Plan hose routing clear of heat sources and moving parts
- Inspect bump stops if ride height has changed
- Check reservoir clearance against the inner fender
Specifications
| Brand | Rubicon Express |
|---|---|
| Part number | RXR713 |
| UPC | 614901238112 |
| Position | Front |
| Shock series | 2.0 Adjustable Reservoir |
| Design | Gas-charged monotube with remote reservoir |
| Extended length | 24.5 inches |
| Collapsed length | 15.3 inches |
| Mount type | Stem/loop |
| Lift range | 2.5 to 3.5 inches |
| Body | 2-inch seamless alloy |
| Shaft | 3/4-inch hard chrome |
| Compression adjustment | 8 stages |
Vehicle fitment
It is designed for the front of the Jeep Wrangler JK (2007-2018) in 2 and 4 door models with a 2.5 to 3.5 inch lift. The valving is specific to the JK generation, so it is designed for the JK only and not the TJ, YJ or later JL.
Confirm your vehicle’s year, model and trim before ordering. The listed lift range is 2.5 to 3.5 inches, so check the lift height on your vehicle.
Installation notes
The shock uses a remote reservoir, and the reservoir mounts are included. Confirm the stem and loop mounts match your existing hardware before installing.
What’s included
The reservoir mounts and the large -6 hose with 360-degree swivel banjos are included with the shock.


























