Overview
The Rough Country 1108 is a stabilizer relocation bracket for the 2007 to 2018 Jeep Wrangler JK, installed with a bolt-on fit. It is a direct fit and covers the two-door and four-door JK trims named below.
The bracket moves the stabilizer from its original position below the axle tube to a higher, protected position above and behind the steering link. A higher mounting position is less exposed, which reduces dents, dings and other damage the stabilizer can take on rough and rocky trails.
The bracket is made from durable plate steel and is powder coated. It is designed to work with the factory JK stabilizer or with most aftermarket stabilizers.
Key features
- Moves the stabilizer above and behind the steering link
- Higher, less exposed mounting position
- Plate steel with powder coat finish
- Works with the original or most aftermarket stabilizers
- Easy bolt-on installation
Protecting the stabilizer on the trail
A stabilizer bar sits low on the axle, where rocks, logs and ledges can strike it. Relocating it higher and behind the steering link puts it in a less exposed spot, which helps on trails with repeated contact against obstacles. The bar still limits body roll on pavement, so the relocation does not change how the bar is used on the road.
After installation, check that the stabilizer moves freely through its normal range and that the steering link keeps clearance at full lock. Recheck the mounting bolts after the first few trail runs, since a bracket that flexes under load can loosen. Inspect the bar and its links for bent sections, cracked bushings and worn ends during routine service.
- Check steering clearance at full lock
- Inspect the bar and links after rocky trails
Specifications
| Brand | Rough Country |
|---|---|
| Part number | 1108 |
| Product type | Stabilizer relocation bracket |
| Material | Plate steel |
| Finish | Powder coat |
| Installation | Bolt-on |
| Stabilizer compatibility | Factory and most aftermarket |
| Fitment type | Direct fit |
| Vehicle | Jeep Wrangler JK, 2007 to 2018 |
Vehicle fitment
It fits the 2007 to 2018 Jeep Wrangler JK in the 70th Anniversary, 75th Anniversary, Rubicon, Sahara, Sport, Sport S and X trims, including the Unlimited versions of those trims.
The list covers the JK only, and the JL and earlier Wrangler generations are not included. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
The bracket is a bolt-on part, and it relocates the stabilizer rather than replacing it. The stabilizer is mounted in the higher position that the bracket provides.
What’s included
The package is one stabilizer relocation bracket. Check the package contents against your installation before starting.










