Overview
The Rancho RS5508 is a mount only steering stabilizer bracket, part number RS5508, with a 2-5/16 O.D. and a Dana 30 detail.
This mount includes a variety of hardware needed to complete the installation of some Rancho steering stabilizers. Use it with a compatible stabilizer that matches its sizing and axle reference.
Key features
- Mount only steering stabilizer bracket
- Brackets included with a variety of hardware
- Shock boot not included
- Single configuration
- Sized at 2-5/16 O.D. with a Dana 30 detail
Mount-only setups
A mount-only bracket holds the stabilizer in position but does not provide damping itself, so the stabilizer you choose determines how the system performs. Check that the stabilizer’s shock boot, end fittings and body size suit the mount. Older axles and linkage often show wear, so inspect the frame and axle tabs for cracks or elongated holes before bolting anything on.
Early Jeep models often have original steering components that have been replaced or modified over the years. Compare the mount spacing against the stabilizer on the vehicle rather than from memory. Replace worn tie rod ends and drag link joints before installing a stabilizer so the new parts are not fighting looseness in the linkage.
- Inspect axle and frame tabs for cracks
- Confirm the stabilizer’s boot and end fittings match
- Replace worn steering joints before fitting
Specifications
| Brand | Rancho |
|---|---|
| Part number | RS5508 |
| UPC | 39703550802 |
| Type | Mount only |
| Single / dual | Single |
| Brackets | Included |
| Shock boot | Not included |
| Hardware | Variety of hardware included |
| Outside diameter | 2-5/16 O.D. |
| Model reference | Dana 30 |
| Fitment type | Direct fit |
Vehicle fitment
Rancho’s manufacturer fitment list covers Dodge, Ford, GMC, International, Isuzu, Jeep, Mitsubishi and Suzuki vehicles from 1954 to 1991, including Jeep CJ, DJ, Commando and Willys models.
The list does not include Jeep Wrangler, Cherokee or Grand Cherokee models. Confirm your vehicle’s year, model and trim before ordering.
Installation notes
Use the supplied hardware, which Rancho says is required to complete installation. Because the shock boot is not included, check that your stabilizer comes with a boot before assembly.
What’s included
One mount only steering stabilizer bracket with a variety of hardware.
Not included: The shock boot and the stabilizer itself.









